FD-1.2V Datasheet, PDF (1/3 Pages) Pericom Semiconductor Corporation – 1.2V CMOS Low Jitter XO

1.2V CMOS Low Jitter XO
FD Series Crystal Clock Oscillator (XO)
5.0 x 3.2mm
FD
5.0 x 3.2mm Ceramic SMD
Product Features
• 1 to 60 MHz Frequency Range
• <1 ps RMS jitter with fundamental or
overtone design
• Low power standby mode
• Pb-free and RoHS/Green compliant
Product Description
The FD Series 1.2V crystal clock oscillator
achieves superb jitter and stability over a broad
range of operating conditions and frequencies.
The output clock signal, generated internally
with a non-PLL oscillator design, is compatible
with LVCMOS/LVTTL logic levels. The device,
available on tape and reel, is contained in a
5.0 x 3.2mm surface-mount ceramic package.
Applications
The FD Series is ideal for compact, high-
density applications requiring low jitter or tight
stability, including:
• Ethernet
• Fibre Channel
• Serial Attached SCSI (SAS)
• Server & Storage platforms
• SONET/SDH linecards
• T1/E1, T3/E3 linecards
• DSLAM
• 802.11a/b/g WiFi
Package:
Recommended Land Pattern:
Pin Functions:
Pin
Function
1
OE Function
2
Ground
3
Clock Output
4
V_DD
Part Ordering Information:
FD XXX YYYY
A: Product�Family
B: XXX = Frequency�Code
C: YYYY = Specification�Code
Following the above format, Saronix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone]   •   www.saronix-ecera.com
All specifications are subject to change without notice. FD 1.2V REV2010_MAY20_01.3
1