PE9303_15 Datasheet, PDF (9/9 Pages) Peregrine Semiconductor Corp. – Divide-by-8 Prescaler

PE9303
Product Specification
Figure 11. Top Marking Specifications
17-0167
XXXXXXXX
XX
YYWW
ZZZZZZ
nn
= ESD symbol as well as represents the Pin 1 designation
= Part number e.g. 20131201
= Part number continuation e.g. P1 (same line as datecode)
= Date Code, last two digits of the year and work week
= Assembly lot number
= Serial Number
Table 4. Ordering Information
Order Code
9303-01
9303-11
9303-98
9303-99
9303-00
Description
PE9303-08CFPJ-B Engineering Samples
PE9303-08CFPJ-B Production Units
Engineering sample die with bonding X (X = A - H)
Flight die with bonding X (X = A - H)
PE9303 Evaluation Kit
Package
8-lead FLAT PACK
8-lead FLAT PACK
Die
Die
Evaluation Board
Shipping Method
50 / Tray
50 / Tray
49 units / Waffle Pack
49 units / Waffle Pack
1 / Box
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
Advance Information: The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp.
Document No. 70-0052-02 │ www.psemi.com
©2003-2012 Peregrine Semiconductor Corp. All rights reserved.
Page 9 of 9