PE95420 Datasheet, PDF (3/7 Pages) Peregrine Semiconductor Corp. – RF SPDT Switch Hermetically sealed ceramic package DC - 8500 MHz

PE95420
Preliminary Specification
Table 3. Operating Ranges
Parameter
V_DD Positive Power
Supply Voltage
V_DD Negative Power
Supply Voltage
I_DD Power Supply Current
(VDD = 3.3V, LS or CTRL =
3.3V)
Control Voltage High
Control Voltage Low
Operating temperature
range
RF Power In:
20 MHz ≤ 8.5 GHz
Min Typ Max Units
3.0
3.3
3.6
V
-3.6
-3.3
-3.0
V
100
µA
0.7xV_DD
-40
V
0.3xV_DD
V
85
°C
24
dBm
Table 4. Absolute Maximum Ratings
Symbol Parameter/Conditions Min Max Units
V_DD
Power supply voltage
V_C1
Voltage on LS input
V_C2
Voltage on CTRL input
-0.3 4.0
V
-0.3
V_DD+
0.3
V
-0.3
V_DD+
0.3
V
T_ST
Storage temperature range -65 150
°C
V_ESD
ESD voltage (Human Body
Model)
2000
V
Exceeding absolute maximum ratings may cause permanent
damage. Operation should be restricted to the limits in the
Operating Ranges table. Operation between operating
range maximum and absolute maximum for extended
periods may reduce reliability.
Table 5. Truth Table
LS
CTRL
RFC-RF1
0
0
off
0
1
off
1
0
on
1
1
on
RFC-RF2
off
on
off
on
Exposed Solder Pad Connection
The exposed solder pad on the bottom of the package
must be grounded for proper device operation.
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe the
same precautions that you would use with other ESD-
sensitive devices. Although this device contains
circuitry to protect it from damage due to ESD,
precautions should be taken to avoid exceeding the
rate specified.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
Switching Frequency
The PE95420 has a maximum 25 kHz switching rate.
Performance Plots
Figure 4. Isolation, RFC-RF1, V_DD=3.3V across
Temperature
Figure 5. Isolation, OFF-State
Document No. 70-0259-02 │ www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 7