PE42660 Datasheet, PDF (1/9 Pages) Peregrine Semiconductor Corp. – SP6T UltraCMOS2.75 V Switch 100 - 3000 MHz

Product Description
The PE42660 is a HaRP™-enhanced SP6T RF Switch
developed on the UltraCMOS™ process technology. It
addresses the specific design needs of the Quad-Band GSM
Handset Antenna Switch Module Market. On-chip CMOS
decode logic facilitates three-pin low voltage CMOS control,
while high ESD tolerance of 1500 V at all ports, no blocking
capacitor requirements, and on-chip SAW filter over-voltage
protection devices make this the ultimate in integration and
ruggedness.
Peregrine’s HaRP™ technology enhancements deliver high
linearity and exceptional harmonics performance. It is an
innovative feature of the UltraCMOS™ process, providing
performance superior to GaAs with the economy and
integration of conventional CMOS.
Preliminary Specification
PE42660 DIE
SP6T UltraCMOS™ 2.75 V Switch
100 – 3000 MHz
Features
• Three pin CMOS logic control with
integral decoder/driver
• Exceptional harmonics performance:
2f_o = -88 dBc and 3f_o = -85 dBc
• Low TX insertion loss: 0.55 dB at
900 MHz, 0.65 dB at 1900 MHz
• TX – RX Isolation of 48 dB at 900 MHz,
40 dB at 1900 MHz
• 1500 V HBM ESD tolerance all ports
• 41 dBm P1dB
• No blocking capacitors required
Figure 1. Functional Diagram
Figure 2. Die Top View
TX1
TX2
CMOS
Control/Driver
and ESD
V1 V2 V3
RX1
RX2
RX3
RX4
TX1
GND
GND
TX2
GND
GND
V_DD
ANT
RX1
GND
RX2
GND
RX3
GND
RX4
GND
V3 GND V2 V1 GND
Document No. 70-0192-02 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 9