PE42632 Datasheet, PDF (1/4 Pages) Peregrine Semiconductor Corp. – SP6T UltraCMOS 2.70 V Switch 100 - 3000 MHz,50ohm

Figure 1. Functional Diagram
V1
CMOS
TX1
Control/
V2
Driver
and ESD
V3
TX2
RX4
RX3
RX2
RX1
Figure 2. Die Top View
GND ANT
V_{DD 12 13 14}
1 TX1
V1 11 ₁₅ GND
2 GND
V2 ^{10 16} GND
3 _TX2
V3 9
PE42632 Die
GND
8
7
6
5
4 _RX1
RX4 RX3 RX2
Figure 3. Package Type: Flip Chip
Product Brief
PE42632 Flip Chip
SP6T UltraCMOS™ 2.70 V Switch
100 – 3000 MHz, 50 Ω
Features
• Three pin CMOS logic control with
integral decoder/driver
• Low TX insertion loss: 0.55 dB at
900 MHz, 0.60 dB at 1900 MHz
• TX – RX Isolation of 38 dB at 900 MHz,
31 dB at 1900 MHz
• Low harmonics: 2f_o = -90 dBc and
3f_o = -82 dBc
• 1500 V HBM ESD tolerance all ports
• 41 dBm P1dB, TX paths
• No blocking capacitors required
• RoHS compliant lead-free solder balls
Product Description
The PE42632 is a HaRP™-enhanced SP6T
RF Switch developed on the UltraCMOS™
process technology. This 50 Ω switch
addresses the specific design needs of the
Quad-Band GSM Handset Antenna Switch
Module Market. On-chip CMOS decode logic
facilitates three-pin low voltage CMOS control.
High ESD tolerance of 1500 V at all ports, no
blocking capacitor requirements and on-chip
SAW filter over-voltage protection devices
make this the ultimate in integration and
ruggedness.
Peregrine’s HaRP™ technology
enhancements deliver high linearity and
exceptional harmonics performance. It is an
innovative feature of the UltraCMOS™
process, providing performance superior to
GaAs with the economy and integration of
conventional CMOS.
Document No. 70-0226-01 │ www.psemi.com
Contact [e-mail] for full version of datasheet
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 4