PE4263 Datasheet, PDF (1/4 Pages) Peregrine Semiconductor Corp. – SP6T UltraCMOS™ 2.6 V Switch 100 - 3000 MHz

Figure 1. Functional Diagram
TX1
TX2
CMOS
Control/Driver
and ESD
V1 V2 V3
RX1
RX2
RX3
RX4
Figure 2. Die Top View
TX1
GND
GND
TX2
GND
GND VDD
ANT
RX1
GND
RX2
GND
RX3
GND
RX4
GND
V3 GND V2 V1 GND
Product Specification
PE4263 DIE
SP6T UltraCMOS™ 2.6 V Switch
100 – 3000 MHz
Features
• Three pin CMOS logic control with
integral decoder/driver
• Low TX insertion loss: 0.55 dB at 900
MHz, 0.65 dB at 1900 MHz
• TX – RX Isolation of 48 dB at 900 MHz,
40 dB at 1900 MHz
• Low harmonics: 2f_o = -85 dBc and
3f_o = -72 dBc
• 1500 V HBM ESD tolerance all ports
• 41 dBm P1dB
• No blocking capacitors required
Product Description
The PE4263 SP6T RF UltraCMOS™ Switch
addresses the specific design needs of the
Quad-Band GSM Handset Antenna Switch
Module Market. On-chip CMOS decode logic
facilitates three-pin low voltage CMOS control.
High ESD tolerance of 1500 V at all ports, no
blocking capacitor requirements and on-chip
SAW filter over-voltage protection devices
make this the ultimate in integration and
ruggedness.
The PE4263 UltraCMOS™ RF Switch is
manufactured in Peregrine’s patented Ultra
Thin Silicon (UTSi®) CMOS process, offering
the performance of GaAs with the economy
and integration of conventional CMOS.
Document No. 70-0175-02 │ www.psemi.com
NDA required for full version: Contact [e-mail]
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 4