PE42612 Datasheet, PDF (1/4 Pages) Peregrine Semiconductor Corp. – SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

Figure 1. Functional Diagram
TX1
RX1
TX2
RX2
CMOS
Control/Driver
and ESD
V1 V2
Figure 2. Die Top View
10
11
12
1
TX1
N/C
ANT
RX1
9
GND
2
GND
8
3
TX2
RX2
GND
VDD
V2
V1
7
6
5
4
Product Brief
PE42612 Flip Chip
SP4T UltraCMOS™ 2.6 V Switch
100 – 3000 MHz
Features
• Two pin CMOS logic control inputs
• Supports 1.8 V Control Logic
• Low TX insertion loss: 0.55 dB at
900 MHz, 0.70 dB at 1900 MHz
• Isolation of 39 dB at 900 MHz, 31 dB at
1900 MHz
• Low harmonics 2f_o = -82 dBc and
3f_o = -74 dBc at 35 dBm input power
• 1500 V HBM ESD tolerance
• Built in CMOS decoder/driver
• RX SAW over voltage protection circuit
• No blocking capacitors required
Product Description
The PE42612 SP4T RF UltraCMOS™ Flip
Chip Switch is designed specifically to address
the needs of the antenna switch module
market for GSM Handsets. On-chip CMOS
decode logic is used to facilitate two-pin, low
voltage CMOS control inputs. High ESD
tolerance of 1500 V at all ports, no blocking
capacitor requirements and on-chip SAW filter
over-voltage protection devices make this the
ultimate in integration and ease of use.
The PE42612 is manufactured on Peregrine’s
UltraCMOS™ process, a patented variation of
silicon-on-insulator (SOI) technology on a
sapphire substrate, offering the performance
of GaAs with the economy and integration of
conventional CMOS.
Document No. 70-0217-01 │ www.psemi.com
Contact [e-mail] for full version of datasheet
©2006 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 4