PE4261 Datasheet, PDF (1/4 Pages) Peregrine Semiconductor Corp. – SP4T UltraCMOS™ 2.6 V Switch 100 - 3000 MHz

Figure 1. Functional Diagram
TX1
TX2
CMOS
Control/Driver
and ESD
V1 V2
Figure 2. Die Top View
10
11
12
1
TX1
N/C
ANT
RX1
9
GND
2
GND
8
3
TX2
RX2
GND
VDD
V2
V1
7
6
5
4
Product Specification
PE4261 FLIP CHIP
SP4T UltraCMOS™ 2.6 V Switch
100 – 3000 MHz
Features
• Two pin CMOS logic control inputs
• Low TX insertion loss: 0.55 dB at
900 MHz, 0.70 dB at 1900 MHz
• Isolation of 39 dB at 900 MHz, 31 dB at
RX1
1900 MHz
• Low harmonics 2f_o = -82 dBc and
3f_o = -74 dBc at 35 dBm input power
RX2
• 1500 V HBM ESD tolerance
• Built in CMOS decoder/driver
• RX SAW over voltage protection circuit
• No blocking capacitors required
Product Description
The PE4261 SP4T RF UltraCMOS™ Flip Chip
Switch is designed specifically to address the
needs of the antenna switch module market
for GSM Handsets. On-chip CMOS decode
logic is used to facilitate two-pin, low voltage
CMOS control inputs. High ESD tolerance of
1500 V at all ports, no blocking capacitor
requirements and on-chip SAW filter over-
voltage protection devices make this the
ultimate in integration and ease of use.
The PE4261 is manufactured on Peregrine’s
UltraCMOS™ process, a patented variation of
silicon-on-insulator (SOI) technology on a
sapphire substrate, offering the performance
of GaAs with the economy and integration of
conventional CMOS.
Document No. 70-0188-02 │ www.psemi.com
NDA required for full version: Contact [e-mail]
©2005-2006 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 4