PE4134 Datasheet, PDF (1/9 Pages) Peregrine Semiconductor Corp. – High Linearity Quad MOSFET Mixer for PCS & 3G BTS

Product Description
The PE4134 is a high linearity, passive Quad MOSFET Mixer
for PCS & 3G Base Station Receivers, exhibiting high dynamic
range performance over a broad LO drive range of up to
+20 dBm. This mixer integrates passive matching networks to
provide single-ended interfaces for the RF and LO ports,
eliminating the need for external RF baluns or matching
networks. The PE4134 is optimized for frequency
down-conversion using low-side LO injection for PCS & 3G
Base Station applications, and is also suitable for
up-conversion applications.
The PE4134 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
Figure 1. Functional Diagram
Product Specification
PE4134
High Linearity Quad MOSFET Mixer
for PCS & 3G BTS
Features
• Integrated, single-ended RF & LO
interfaces
• High linearity: IIP3 >+31 dBm,
1.9 GHz (+17 dBm LO)
• Low-conversion loss: 7.4 dB
(+17 dBm LO)
• High isolation: Typical LO-IF at
33 dB, LO-RF at 31 dB
• Optimized for low-side LO injection
• Packaged in a 6-lead 3x3 mm DFN
Figure 2. Package Type
6-lead 3x3 mm DFN
180^o
LO
Two-Way
Power
IF
Divider
180^o
RF
Two-Way
Power
Divider
Table 1. AC and DC Electrical Specifications @ +25 °C
Parameter
Frequency Range:
LO
RF
IF¹
Minimum
1540
1800
--
Typical
--
--
260
Conversion Loss²
7.4
Isolation:
LO-RF
LO-IF
Input IP3
1.8 GHz
1.9 GHz
2.0 GHz
27
31
27
33
26
29
31
33
28
31
Input 1 dB Compression
22
Maximum
1740
2000
--
8.0
Units
MHz
MHz
MHz
dB
dB
dB
dBm
dBm
dBm
dBm
Notes: 1. An IF frequency of 260 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO
frequencies are within the specified maximum and minimum.
2. Conversion Loss includes loss of IF transformer (M/A COM ETK4-2T, nominal loss 0.7 dB at 260 MHz).
*Test conditions unless otherwise noted: IF = 260 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm.
Document No. 70-0087-03 │ www.psemi.com
©2006 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 9