SCR100 Datasheet, PDF (1/2 Pages) PEAK electronics GmbH – Atlas SCR - Triac and Thyristor Analyser (Model SCR100)

SCR100 Resources
SCR100 Reseller Resources
Page 1 of 2
Title
Atlas SCR - Triac and Thyristor Analyser (Model SCR100)
Catalogue copy
The Atlas SCR is specifically designed to automatically analyse a wide range of Triacs and
Thyristors (SCRs). Connect the part any way round and press test. The part type is identified
(Triac or Thyristor), the pinout is identified and the gate sensitivity is displayed in 1 of 9
sensitivity categories as well as gate voltage. Suitable for parts that require a gate trigger current
from less than 100uA up to 90mA. Load tests are performed with an internally generated load of
12V at 100mA, all from a single AAA alkaline battery (supplied). Not designed for in-circuit
use.
Features
Automatic pinout detection and identification, connect any way round.
Automatic Triac/Thyristor detection.
Generates gate currents from 100uA up to 90mA.
Gate sensitivity category displayed.
Constant load test of 12V at 100mA regardless of battery condition.
Supplied with gold plated red/green/blue universal hook probes.
Specification
Summary
Parameter
Peak test current
into S/C
Peak test voltage
across O/C
Gate trigger current
range (I_GT)
Gate voltage
resolution (V_GT)
Battery type
Battery voltage
range
Low battery
warning
Inactivity power-
down period
Dimensions
(enclosure)
Operating
temperature range
Minimum Typical Maximum Note
100mA 120mA
1
11.0V 12.0V 12.5V
1,2
0.1mA
90mA
20mV
AAA 1.5V Alkaline
0.8V
1.5V 1.7V
1.1V
25 seconds
103 x 70 x 20 mm
10°C
35°C
3
1. Between any pair of test clips.
2. For battery voltage greater than 0.9V.
3. Subject to acceptable LCD visibility.
Photography
http://www.peakelec.co.uk/resources/scr100.html
24/04/2012