PPM165-SIP Datasheet, PDF (1/3 Pages) PEAK electronics GmbH – PPM-SIP-SERIES

PPMxx-SIP-xxELF
PPM-SIP-SERIES Rev.08-2011
1.65 - 3 Watt
Univ. 100-400VDC / 85-264VAC*
Single Output
Over Temperature Protection
Short Circuit Protection
2 kV AC I/O Isolation
High Efficiency / Density
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. [phone]
Fax: [phone]
www.peak-electronics.de
[e-mail]
The PPM-SIP-Series are high efficiency green power modules with
miniature packaging provided by Peak. The features of this series are: wide
input voltage, DC and AC all in one, high efficiency, high reliability, low loss,
safety isolation etc. They are widely used in industrial, office and civil
equipments, as well as applications where no special requirement for EMC
performance. It is recommended to add EMI suppression circuit or take
measure to shield when there is strict requirement for EMC performance.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Input Voltage Range
100 – 400 VDC or 85 – 264 VAC* universal
Input Current
40mA, typ.
External Input Fuse (recommended)
0.5A / 250V
* Attention: For AC-Input a capacitor between PIN 7 and PIN 10 is needed!! (See page 3)
Output Specifications
Voltage Accuracy
Input variation
Load variation (10-100%)
Ripple and Noise (20Mhz bandwidth)
3.3 / 5 / 9 VDC models
12 VDC models
15 VDC models
24VDC models
±2%
±0.5%, typ.
±1%, typ.
≤ 100mV pk-pk
≤ 120mV pk-pk
≤ 150mV pk-pk
≤ 240mV pk-pk
Short Circuit Protection
Over Temperature Protection
Continuous, auto recovery
150°C, max.
Common Specifications
Temperature range
Power derating
Case temperature
Storage
Humidity (non condensing)
Temperature Coefficient
Switching Frequency
I/O Isolation Voltage
Leakage current
Case Material
Reliability Calculated MTBF (MIL-HDBK-217F)
-40°C to +85 °C
1.33% / °C (above 55°C)
+90°C, max.
-40°C to +105 °C
85%, max.
0.02%/°C
100kHz, typ.
2000VAC / 1min.
None
UL94V-0 rated
> 300,000 hrs
PPM-SIP-Series – PPMxx-SIP-xxELF – Single Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3