English
Language : 

PPM05-E-3R3ELF Datasheet, PDF (1/3 Pages) PEAK electronics GmbH – PPM-SERIES
PPM05-E-xxELF
PPM-SERIES
Rev.04-2012
5 Watt
Univ. 85-264VAC (110-370VDC)
Single Output
Over Voltage Protection (out)
4 kV AC I/O Isolation
Low Ripple and Noise
High Efficiency
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
The PPM-Series are high efficiency green power moduls with various
packaging provided by Peak. The features of this series are: wide input
voltage, DC and AC all in one, high efficiency, high reliability, low loss,
safety isolation etc. They are widely used in industrial, office and civil
equipments..
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Input Voltage Range
85 – 264 VAC or 110 – 370 VDC universal
Input Frequency
47 – 440 Hz
Input (Inrush) Current
110 VAC
230 VAC
PPM05 models 110 mA (10A), typ. 70mA (20A), typ.
External Input Fuse (recommended)
1A / 250V
slow blow
Output Specifications
Voltage Accuracy
±2%, typ (±3% at 3.3 Vout)
Input variation
±0.5%, typ
Load variation (10-100%)
±1% , typ
Ripple and Noise (20Mhz bandwidth)
30mV pk-pk, typ
Short Circuit Protection
Continuous, auto resume
Over output voltage protection
Diode clamp
Common Specifications
Temperature range
-25°C to +70 °C
Power derating
2% / °C
Case temperature
+95°C (max)
Storage
-40°C to +105 °C
Hold up Time
50mS, typ. (230VAC)
Humidity (non condensing)
95%, max.
Temperature Coefficient
0.02%/°C
Switching Frequency
100kHz, typ
I/O Isolation Voltage
4000VAC / 1min.
Leakage current
None
EMI / RFI conducted
EN55011, level A
EMC compliance
ESD IEC/EN 61000-4-2 ±15kV/±15kV
RF IEC/EN 61000-4-3 10V/m
EFT / bursts IEC/EN 61000-4-4 ±4kV
Surge IEC/EN 61000-4-5 ±2kV/±4kV
Safety Standards
IEC60601, EN60601
Safety Class
CLASS 2
Case Material
UL94V-0 rated
Reliability Calculated MTBF (MIL-HDBK-217F) > 300,000 hrs
Weight
~ 35g
PPM-Series – PPM05-E-xxELF – Single Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3