P8GG_14 Datasheet, PDF (1/3 Pages) PEAK electronics GmbH – PMF-SERIES

P8GG-xxxxE(Hxx)LF
PMF-SERIES
Rev.02-2009
1.5 Watt
Regulated
Single Output
SIP 12 Case
1 kV up to 5.2kV DC I/O Isolation
Cont. Short Circuit Protection
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. [phone]
Fax: [phone]
www.peak-electronics.de
[e-mail]
The PMF series P8GG-xxxxE(Hxx)LF is a family of cost effective 1.5 W
regulated single output DC/DC converters. These converters are in an ultra
miniature SIP12 case. Devices are encapsulated. High performance
features: Regulated Output, 1000VDC up to 5200VDC input/output
isolation, high efficiency operation, output voltage accuracy of ±2%
maximum and input range of ±10% tolerance.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
± 10%
Capacitors
20 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation (0% - 100%)
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
± 2%
Indefinite (Automatic Recovery)
± 0.5%
± 0.5% (3.3Vout Models: ± 1.5%)
75 mV pk-pk
± 0.02% / °C
General Specifications
Efficiency
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF (MIL-HDBK-217F)
See Table
1000 VDC (up to 5200 VDC optional*)
60 pF, typ.
1000 M Ohm
50 kHz (typ.)
95% rel H
> 1.12 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Non Conductive Black Plastic (UL94V-0 rated)
Epoxy (UL94V-0 rated)
~ 7.2g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
-25 to +71°C (ambient)
100°C
-40 to +125°C
Free Air Convection
Soldering 260°C, max. (1.5mm from case 10s.)
PMF-Series – P8GG-xxxxE(Hxx)LF – Single Output – SIP12 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3