English
Language : 

P34TG_14 Datasheet, PDF (1/3 Pages) PEAK electronics GmbH – PMD-SERIES
P34TG-xxxxE/Z2:1MLF
PMD-SERIES
Rev.11-2008
8 Watt
Regulated
Single and Dual Output
1.5 kV DC I/O Isolation
DIP24 Metal Case
Continuous Short Circuit Prot.
Full SMD Technology
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
The PMD 8W series P34TG-xxxxE/Z2:1MLF is a family of cost effective 8W
single & dual output DC-DC converters. These converters are encapsulated
in miniature DIP24 metal case. High performance features: 1500VDC
input/output isolation, continuous short circuit protection with automatic
restart and tight line / load regulation, high efficiency operation, output
voltage accuracy of ±1% maximum and a wide input of 2:1
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
2:1 Wide Input
Pi Type
35 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation (Io = 10 - 100%)
Cross Regulation³ (Dual Output)
Over Current Protection
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
± 1%
Indefinite (automatic recovery)
± 0.5%
± 0.5% (3.3 Vout Models: ± 0.7%)
± 5%
150% of FL, typ.
75 mV pk-pk
± 0.02% / °C
General Specifications
Efficiency
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency (typical)
Humidity
Reliability Calculated MTBF (MIL-HDBK-217F)
See Table
1500 VDC
1000 pF, typ.
1000 MOhm
330 kHz
95% rel H
> 0.91 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Nickel Coated Copper
Epoxy (UL94V-0 rated)
~ 17.0g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
-40 to +60°C (ambient)
100°C
-40 to +125°C
Free Air Convection
Soldering 260°C, max. (1.5mm from case 10s.)
PMD-Series – P34TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3