PE5SC3002 Datasheet, PDF (2/6 Pages) Pasternack Enterprises, Inc. – 3.5mm General Purpose Calibration Kit Component

3.5mm General Purpose Calibration Kit Component
Thru Operating From DC to 26.5 GHz
TECHNICAL DATA SHEET
PE5SC3002
General Instructions and Usage Notes
# Notes
1 Keep provided protective blue caps installed when not in use.
2 Store in climate controlled environment.
3 Always keep connectors clean.
4 Avoid touching the connector interface.
5 Use caution when handling.
6
For female components, do not insert male pin greater than 0.037" [.94 mm]. Failure to
comply will result in damage to the female connector.
7
When mating, always ensure that the components to be interconnected remain in a fixed
position while rotating only the coupling nut slowly to mate the connectors.
8
When de-mating, always ensure that the interconnected components remain in a fixed
position while rotating only the coupling nut slowly to de-mate the connectors.
Visually inspect the connector threads prior to use. If needed, clean the center conductor
9 pin and outer conductor with alcohol to remove any debris that may be present. Be sure to
apply the alcohol in a circular motion with a lint-free cloth or applicator.
10 Use at room temperature.
11 Torque wrench provided is intended for 3.5mm connector types and is calibrated to 8 in-lbs.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm General Purpose Calibration Kit Component Thru Operating From DC to 26.5 GHz
PE5SC3002
PE5SC3002 REV 1.0
2