PE5SC1003 Datasheet, PDF (2/4 Pages) Pasternack Enterprises, Inc. – 3.5mm Male General Purpose Calibration Kit Component Short Circuit Operating From DC to 8.5 GHz

3.5mm Male General Purpose Calibration Kit Component
Short Circuit Operating From DC to 8.5 GHz
TECHNICAL DATA SHEET
PE5SC1003
General Instructions and Usage Notes
# Notes
1 Keep provided protective blue caps installed when not in use.
2 Store in climate controlled environment.
3 Always keep connectors clean.
4 Avoid touching the connector interface.
5 Use caution when handling.
6
For female components, do not insert male pin greater than 0.037" [.94 mm]. Failure to
comply will result in damage to the female connector.
7
When mating, always ensure that the components to be interconnected remain in a fixed
position while rotating only the coupling nut slowly to mate the connectors.
8
When de-mating, always ensure that the interconnected components remain in a fixed
position while rotating only the coupling nut slowly to de-mate the connectors.
Visually inspect the connector threads prior to use. If needed, clean the center conductor
9 pin and outer conductor with alcohol to remove any debris that may be present. Be sure to
apply the alcohol in a circular motion with a lint-free cloth or applicator.
10 Use at room temperature.
11 Torque wrench provided is intended for 3.5mm connector types and is calibrated to 8 in-lbs.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Short Circuit Operating From DC to
8.5 GHz PE5SC1003
PE5SC1003 REV 1.0
2