PE8732 Datasheet, PDF (1/3 Pages) Pasternack Enterprises, Inc. – 5 Section Tunable Band Pass Filter With N Female Connectors

5 Section Tunable Band Pass Filter With N Female Connectors
Operating From 1 GHz to 2 GHz With a 5% Bandwidth
TECHNICAL DATA SHEET
PE8732
5 Section Tunable Band Pass Filter With N Female Connectors Operating From 1 GHz to 2 GHz With a
5% Bandwidth
Pasternack’s Tunable Band Pass Filters and Band Reject Filters (also referred to as Band-Stop filters or Band-Rejection
filters) are available in tunable frequency ranges from 100 MHz to 3 GHz. Tunable RF filter products are bench top units
that are ideal for reducing harmonics and noise levels with lab-grade precision. The average power rating of these tunable
filter components is 50 Watts and have a dial accuracy of 1%. Both the 3 section and 5 section bandpass and band-reject
filters have a nominal 5% bandwidth that is tunable across the filter’s frequency range.
• Available in both Band pass and Band reject
• 100 MHz to 3 GHz Frequency Ranges
• Typical VSWR is 1.5:1
• N-Type Connectors
Configuration
Design
Connector 1
Connector 2
Tunable Filter
N Female
N Female
Electrical Specifications
Useable Frequency Range, GHz
Nominal Bandwidth, %
30 dB / 3 dB Ratio
50 dB / 3 dB Ratio
Tuning Dial Accuracy, %
Maximum VSWR
Maximum Insertion Loss, dB
Impedance, Ohms
Maximum Input Power, Watts
1 to 2
5
2.2:1
3.5:1
1
1.5:1
1
50
50
Mechanical Specifications
Temperature
Operating Range, deg C
Storage Range, deg C
Size
Length, in [mm]
Width, in [mm]
Height, in [mm]
.
Connector 1
Type
-55 to +85
-55 to +125
7.25 [184.15]
2.75 [69.85]
2.9 [73.66]
N Female
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 5 Section Tunable Band Pass Filter With N Female Connectors Operating From 1 GHz to
2 GHz With a 5% Bandwidth PE8732
PE8732 REV 1.0
1