PE85N1020 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – 50 Ohm BNC Medium Power Noise Source With A Noise Output ENR Of 30 dB From 0.01 MHz to 2 GHz

50 Ohm BNC Medium Power Noise Source With A Noise
Output ENR Of 30 dB From 0.01 MHz to 2 GHz
Noise Generators Technical Data Sheet
PE85N1020
Features
• 10 kHz to 2 GHz Frequency Range
• Output Noise ENR 30 dB min
• Flatness 1.5 dB typ
Applications
• Measure Noise Figure
• Signal Strength Calibrators
.
• Radar
• Jamming
• 28 VDC Operation
• Small Size 1.25” by 0.75” by 0.50”
• SATCOM for BER and NF
• Source of Jitter
Description
The PE85N1020 is a coaxial Noise Source with 30 dB min of Output Noise ENR. The Unit features flatness better than +/- 1.5
dB over the frequency range 10 kHz to 2 GHz. The unit has an BNC Female DC Input Connector and an SMA Female RF
Output Connector. Standard operation is from +28 Vdc with a 20 mA maximum current draw. The Noise Source ideal for
noise figure measurements and built in test applications. The unit features a small profile housing of 1.25” by 0.75” by 0.50”
excluding connectors, ideal when space is at a premium.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
10KHz
2
GHz
Impedance 50 Ohms
Output ENR
30
dB
Flatness ±1.5 dB
VSWR 3:1
Output Variation vs Input Voltage
0.1
dB/%V
Output Variation vs Temperature
0.01
dB/deg C
Bias Voltage 1
28
Volts
Input Current 1
20
mA
Calibration Points 10, 100, 1000, and 2000 MHz
.
Mechanical Specifications
Size
Length
Width/Dia.
Height
.
.
Package Type
1.25 in [31.75 mm]
0.75 in [19.05 mm]
0.5 in [12.7 mm]
Connectorized Module
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including
price, inventory and certifications: 50 Ohm BNC Medium Power Noise Source With A Noise Output ENR Of 30 dB From
0.01 MHz to 2 GHz PE85N1020
PE85N1020 REV 1.0
1