PE85N1018 Datasheet, PDF (1/3 Pages) Pasternack Enterprises, Inc. – SMA Calibrated Noise Source Bench Top, Output Pout of 0 dBm, +28 VDC, 10 MHz to 3 GHz

SMA Calibrated Noise Source Bench Top, Output
Pout of 0 dBm, +28 VDC, 10 MHz to 3 GHz
Noise Generators Technical Data Sheet
PE85N1018
Features
• 10 MHz to 3 GHz GHz Bandwidth
• Manually Controlled White Gaussian Noise Instrument
• Simple Operation
• Output Power 0 dBm
• Flatness +/- 2.5 dB
• 10 dB Rotary Attenutor with 1 dB steps
• 120 VAC power supply
• Bench Top or Rackmount chasis
• Front panel support output Female SMA connector
• On/Off power switch
• rotary attenutor knob.
Applications
• System and Component Wireless
Additive white Gaussian Noise
and SNR testing
.
• signal simulation
• HDTV and CATV testing
• Bit Error Rate (BER) testing
• Military Applications
Description
The PE85N1018 is a general purpose calibrated noise instrument which operates over the frequency range of 10 MHz to 3 GHz.
This instrument generates an output power level of 0 dBm with +/- 2.5 dB flatness. The design features a manually controlled
10 dB rotary attenuator with 1 dB adjustable steps, making it simple to operate with reduced test set up time. The instrument
incorporates a precision noise source, amplifier, attenuator, and power supply, and delivers a repeatable, symmetrical white
Gaussian Noise signal. The chassis design can be used for bench top or in a rack test station. Ideal for applications that
include system and component wireless testing, signal simulation, HDTV and CATV testing, as well as a general purpose test
source for Bit Error Rate (BER) testing. The power requirement is 120 VAC at 60 Hz and the operational temperature range
is -20°C to +75°C. The rugged package supports an output female SMA connector, rotary dial for attenuation, and on/off AC
power switch on the front panel.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
3
GHz
Impedance 50 Ohms
Flatness ±2.5 dB
Noise Attenuator (in 1 Steps)
9
dB
Output Power 0 dBm
Bias Voltage 1
28
Volts
.
Electrical Specification Notes:
Output: White Gaussian Noise
AC Power: Standard line voltages
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Calibrated Noise Source Bench Top, Output Pout of 0 dBm, +28 VDC, 10 MHz to 3 GHz
PE85N1018
PE85N1018 REV 1.0
1