PE85N1015 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – SMA Calibrated, Integral Isolator Noise Source Module, Output ENR of 30 dB, +28 VDC, 7.2 GHz to 8.4 GHz

SMA Calibrated, Integral Isolator Noise Source Module,
Output ENR of 30 dB, +28 VDC, 7.2 GHz to 8.4 GHz
Noise Generators Technical Data Sheet
PE85N1015
Features
• 7.2 to 8.4 GHz Bandwidth
• Integral Isolator for improved port matching
• Very High ENR 30 to 35 dB
• Excellent flatness +/- 0.75 dB max
• Low VSWR 1.3:1 typical
• Extremely Stable Performance
• BNC Voltage Bias and Output Female SMA connectors
• Designed to meet MIL-STD-202F environmental test
conditions
Applications
• High Noise Figure Measurements
• Built-In Test equipment for signal
strenth calibrators and radar
.
applications
• Automatic Test Equipment (ATE)
• Baseband Signal Simulation
• 802.11ac WiFi.
Description
The PE85N1015 is a coaxial packaged calibrated Noise Source with an integral Isolator which operates over the frequency
range of 7.2 GHz to 8.4 GHz. The benefit of the integrated isolator results in improved port matching for more accurate
measurements as well as protection of the noise diode from incident RF power. This design features a high output ENR of 30
to 35 dB with excellent flatness of +/- 0.75 dB max, with extremely stable performance over temperature. Ideal for applications
that require high ENR and resistance to large incident RF power that may be associated with automated test equipment (ATE),
radiometer, and radar systems. The input voltage is +28 Vdc which is internally reguated and the operational temperature
range is -20°C to +75°C. The rugged package suports a BNC connector for DC bias and an output Female SMA connector.
Additionally, the model is designed to meet a variety of demanding MIL-STD-202F environmental test conditions including
Humidity, Thermal Shock, and Vibration for added confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
7.2
8.4
GHz
Impedance 50 Ohms
Output ENR
30 35
dB
Flatness ±0.75 dB
VSWR 1.3:1
Bias Voltage 1
.
28
Volts
Mechanical Specifications
Size
Length
Width/Dia.
Height
.
2.5 in [63.5 mm]
1.25 in [31.75 mm]
0.81 in [20.57 mm]
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Calibrated, Integral Isolator Noise Source Module, Output ENR of 30 dB, +28 VDC,
7.2 GHz to 8.4 GHz PE85N1015
PE85N1015 REV 1.0
1