PE85N1011 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – SMA Amplified Noise Source Module, Output Pout of 0 dBm, +15 VDC, 10 MHz to 2 GHz

SMA Amplified Noise Source Module, Output Pout
of 0 dBm, +15 VDC, 10 MHz to 2 GHz
Noise Generators Technical Data Sheet
PE85N1011
Features
• 10 MHz to 2 GHz Bandwidth
• High Crest Factor Design
• Output Power: 0 dBm
• Typical Flatness: +/- 2 dB
• Noise Power: -93 dBm/Hz
Applications
• Bit Error Rate (BER) Testing for
wireless test applications
• Random Jitter source
.
• SMA Female Output Connector
• Designed to meet MIL-STD-202F environmental test
conditions
• Amplified Noise Source
• Built-In Test equipment for signal
strength calibrators and radar
applications
• Dithering for increased dynamic
range of A/D converters.
Description
The PE85N1011 is a coaxial packaged Amplified Noise Source module which operates over a wide frequency range from 10
MHz to 2 GHz. The high Crest Factor design generates an output power level of 0 dBm with +/- 2.0 dB typical flatness and
is ideal for Bit Error Rate (BER) testing for wireless test applications, as well as for Noise Figure measurements and a variety
of built-in test applications. Noise power is -93 dBm/Hz and the temperature coefficient is 0.025 dB/°C. The input voltage
is +15 Vdc which is internally regulated and the operational temperature range is -40°C to +100°C. The rugged package
design supports an output Female SMA connector with an EMI/RFI filter voltage pin and ground tab. Additionally, the model
is designed to meet a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock,
and Vibration for added confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
2
GHz
Impedance 50 Ohms
Flatness ±2 dB
Output Variation vs Temperature
0.025
dB/deg C
Output Power 0 dBm
Output Power Spectral Density
-93
dBm/Hz
Bias Voltage 1
15
Volts
Input Current 1
.
90
mA
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Amplified Noise Source Module, Output Pout of 0 dBm, +15 VDC, 10 MHz to 2 GHz
PE85N1011
PE85N1011 REV 1.0
1