PE85N1010 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – SMA Amplified Noise Source Module, Output Pout of 10 dBm, +15 VDC, 0.1 MHz to 500 MHz

SMA Amplified Noise Source Module, Output Pout
of 10 dBm, +15 VDC, 0.1 MHz to 500 MHz
Noise Generators Technical Data Sheet
PE85N1010
Features
• 0.1 MHz to 500 MHz Bandwidth
• High Crest Factor Design
• Output Power: +10 dBm
• Typical Flatness: +/- 1.5 dB
• Noise Power: -77 dBm/Hz
Applications
• Bit Error Rate (BER) Testing for
wireless test applications
• Random Jitter source
.
• SMA Female Output Connector
• Designed to meet MIL-STD-202F environmental test
conditions
• Amplified Noise Source
• Built-In Test equipment for signal
strength calibrators and radar
applications
• Dithering for increased dynamic
range of A/D converters.
Description
The PE85N1010 is a coaxial packaged Amplified Noise Source module which operates over a wide frequency range from 0.1
MHz to 500 MHz. The high Crest Factor design generates an output power level of +10 dBm with +/- 1.5 dB typical flatness
and is ideal for Bit Error Rate (BER) testing for wireless test applications, as well as for Noise Figure measurements and a
variety of built-in test applications. Noise power is -77 dBm/Hz and the temperature coefficient is 0.025 dB/°C. The input
voltage is +15 Vdc which is internally regulated and the operational temperature range is -40°C to +100°C. The rugged
package design supports an output Female SMA connector with an EMI/RFI filter voltage pin and ground tab. Additionally, the
model is designed to meet a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal
Shock, and Vibration for added confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.1
500
MHz
Impedance 50 Ohms
Flatness ±1.5 dB
Output Variation vs Temperature
0.025
dB/deg C
Output Power 10 dBm
Output Power Spectral Density
-77
dBm/Hz
Bias Voltage 1
15
Volts
Input Current 1
.
160
mA
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Amplified Noise Source Module, Output Pout of 10 dBm, +15 VDC, 0.1 MHz to 500 MHz
PE85N1010
PE85N1010 REV 1.0
1