PE85N1008 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – 2.92mm Precision Calibrated Noise Source Module, Output ENR of 10 dB, +28 VDC, 100 MHz to 40 GHz, Calibration Standard

2.92mm Precision Calibrated Noise Source Module, Output ENR
of 10 dB, +28 VDC, 100 MHz to 40 GHz, Calibration Standard
Noise Generators Technical Data Sheet
PE85N1008
Features
• 100 MHz to 40 GHz Bandwidth
• Calibrated Frequencies: 1 GHz steps
• ENR output: 10 dB min
• Excellent Stability
• Noise Output Temperature Variation: <0.01 dB/°C
• Noise Output Variation <0.1 dB/%V
• Rugged Package Design supports output Female
2.92mm connector
• Designed to meet MIL-STD-202F environmental test
conditions
• Calibrated Precision Noise Source
• VSWR < 1.35:1
• Outupt Noise ENR 14 dB typical
• Highly Stable and Accurate Performance
• Maximum Reverse Power 1 Watt
Applications
• Noise Figure Measurements
• Built-In Test equipment for signal
strenth calibrators and radar
applications
• Automatic Test Equipment (ATE)
.
• Jamming
• Baseband Signal Simulation
• Additive White Gausian Noise
(AWGN) source for Error Rate
Measurements
• Increase dynamic range of A/D
Converters
• SATCOM for bit error rate (BER)
and noise figure
• Can be used as a Jitter source.
Description
The PE85N1008 is a coaxial packaged calibrated precision Noise Source module which operates over an extremely
wide frequency range from 0.1 GHz to 40 GHz. The design features very low VSWR < 1.50:1 that significantly increases
mesurement accuracy and is ideal for Noise Figure measurements and built-in applications. This model operates at +28 Vdc
and features an output ENR level ranging from 10 to 17 dB with 10 MHz calibration points every GHz. Highly stable and
accurate performance is specified over -55°C to +85°C with Noise Output Temperature Variation <0.009 dB/°C and Noise
Output Variation < 0.002 dB/%V. Maximum Reverse Power is 1 Watt. The rugged industry standard profile package design
supports an input Female BNC connector for DC bias and an output Male 2.92mm connector. Additionally, the model is
designed to meet a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock,
and Vibration for added confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.1
40
GHz
Impedance 50 Ohms
Output ENR
10 17
dB
Output Variation vs Input Voltage
0.002
dB/%V
Output Variation vs Temperature
0.009
dB/deg C
Bias Voltage 1
28 ±2
Volts
Input Current 1
30
mA
Reverse Power
1
Watts
Calibration Points
Every GHz
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including
price, inventory and certifications: 2.92mm Precision Calibrated Noise Source Module, Output ENR of 10 dB, +28 VDC,
100 MHz to 40 GHz, Calibration Standard PE85N1008
PE85N1008 REV 1.1
1