PE85N1007_16 Datasheet, PDF (1/7 Pages) Pasternack Enterprises, Inc. – 3.5mm Precision Calibrated Noise Source Module, Output ENR of 13 dB, +28 VDC, 10 MHz to 26 GHz, Calibration Standard

3.5mm Precision Calibrated Noise Source Module, Output ENR
of 13 dB, +28 VDC, 10 MHz to 26 GHz, Calibration Standard
Noise Generators Technical Data Sheet
PE85N1007
Features
• 10 MHz to 26 GHz Bandwidth
• Calibrated Frequencies: 1 GHz steps
• ENR output: 13 dB min
• Typical Flatness +/- 1.5 dB
• Excellent Stability
• Noise Output Temperature Variation: <0.01 dB/°C
• Noise Output Variation <0.1 dB/%V
• Rugged Package Design supports output Female SMA
connector
• Designed to meet MIL-STD-202F environmental test
conditions
• Calibrated Precision Noise Source
• VSWR < 1.35:1
• Outupt Noise ENR 15 dB typical
• Highly Stable and Accurate Performance
• Maximum Reverse Power 1 Watt
Applications
• Noise Figure Measurements
• Built-In Test equipment for signal
strenth calibrators and radar
applications
• Automatic Test Equipment (ATE)
.
• Jamming
• Baseband Signal Simulation
• Additive White Gausian Noise
(AWGN) source for Error Rate
Measurements
• Increase dynamic range of A/D
Converters
• SATCOM for bit error rate (BER)
and noise figure
• Can be used as a Jitter source.
Description
The PE85N1007 is a coaxial packaged calibrated precision Noise Source module which operates over a wide frequency range
from 0.01 GHz to 18 GHz. The design features very low VSWR < 1.35:1 that significantly increases mesurement accuracy
and is ideal for Noise Figure measurements and built-in applications. This model operates at +28 Vdc and features an output
ENR level ranging from 13 to 17 dB with 10 MHz calibration points every GHz. Highly stable and accurate performance is
specified over -55°C to +85°C with Noise Output Temperature Variation <0.009 dB/°C and Noise Output Variation < 0.002
dB/%V. Maximum Reverse Power is 1 Watt. The rugged industry standard profile package design supports an input Female
BNC connector for DC bias and an output Male 3.5mm connector. Additionally, the model is designed to meet a variety
of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock, and Vibration for added
confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
26
GHz
Impedance 50 Ohms
Output ENR
13 17
dB
Flatness ±1.5 dB
Output Variation vs Input Voltage
0.002
dB/%V
Output Variation vs Temperature
0.009
dB/deg C
Bias Voltage 1
28 ±2
Volts
Input Current 1
30
mA
Reverse Power
1
Watts
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 3.5mm Precision Calibrated Noise Source Module, Output ENR of 13 dB, +28 VDC, 10 MHz
to 26 GHz, Calibration Standard PE85N1007
PE85N1007 REV 1.1
1