PE85N1006_16 Datasheet, PDF (1/7 Pages) Pasternack Enterprises, Inc. – SMA Precision Calibrated Noise Source Module, Output ENR of 14 dB, +28 VDC, 10 MHz to 18 GHz, Calibration Standard

SMA Precision Calibrated Noise Source Module, Output ENR
of 14 dB, +28 VDC, 10 MHz to 18 GHz, Calibration Standard
Noise Generators Technical Data Sheet
PE85N1006
Features
• 10 MHz to 18 GHz Bandwidth
• Calibrated Frequencies: 1 GHz steps
• ENR output: 14 dB min
• Typical Flatness +/- 1.5 dB
• Excellent Stability
• Noise Output Temperature Variation: <0.01 dB/°C
• Noise Output Variation <0.1 dB/%V
• Rugged Package Design supports output Female SMA
connector
• Designed to meet MIL-STD-202F environmental test
conditions
• Calibrated Precision Noise Source
• VSWR < 1.25:1
• Outupt Noise ENR 15 dB typical
• Highly Stable and Accurate Performance
• Maximum Reverse Power 1 Watt
Applications
• Noise Figure Measurements
• Built-In Test equipment for signal
strenth calibrators and radar
applications
• Automatic Test Equipment (ATE)
.
• Jamming
• Baseband Signal Simulation
• Additive White Gausian Noise
(AWGN) source for Error Rate
Measurements
• Increase dynamic range of A/D
Converters
• SATCOM for bit error rate (BER)
and noise figure
• Can be used as a Jitter source.
Description
The PE85N1006 is a coaxial packaged calibrated precision Noise Source module which operates over a wide frequency range
from 0.01 GHz to 18 GHz. The design features very low VSWR < 1.25:1 that significantly increases mesurement accuracy and
is ideal for Noise Figure measurements and built-in applications. This model operates at +28 Vdc and features an output ENR
level ranging from 14 to 16 dB with 10 MHz calibration points every GHz. Highly stable and accurate performance is specified
over -55°C to +85°C with Noise Output Temperature Variation <0.009 dB/°C and Noise Output Variation < 0.002 dB/%V.
Maximum Reverse Power is 1 Watt. The rugged industry standard profile package design supports an input Female BNC
connector for DC bias and an output Male SMA connector. Additionally, the model is designed to meet a variety of demanding
MIL-STD-202F environmental test conditions including Humidity, Thermal Shock, and Vibration for added confidence for
highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
18
GHz
Impedance 50 Ohms
Output ENR
14 16
dB
Flatness ±1.5 dB
Output Variation vs Input Voltage
0.002
dB/%V
Output Variation vs Temperature
0.009
dB/deg C
Bias Voltage 1
28 ±2
Volts
Input Current 1
30
mA
Reverse Power
1
Watts
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Precision Calibrated Noise Source Module, Output ENR of 14 dB, +28 VDC, 10 MHz to
18 GHz, Calibration Standard PE85N1006
PE85N1006 REV 1.1
1