PE85N1003_16 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – SMA Calibrated Noise Source Module, Output ENR of 26 dB, +28 VDC, 10 MHz to 6 GHz

SMA Calibrated Noise Source Module, Output
ENR of 26 dB, +28 VDC, 10 MHz to 6 GHz
Noise Generators Technical Data Sheet
PE85N1003
Features
• 10 MHz to 6 GHz Frequency Range
• Output Noise ENR 26 dB min
• Flatness 2.0 dB typ
Applications
• Measure Noise Figure
• Signal Strength Calibrators
.
• Radar
• Jamming
• 28 VDC Operation
• Small Size 1.25” by 0.75” by 0.50”
• SATCOM for BER and NF
• Source of Jitter
Description
The PE85N1003 is a coaxial packaged Noise Source module which operates over a wide frequency range from 10 MHz to
6 GHz. The design is calibrated for 1 GHz steps and is ideal for Noise Figure measurements and a variety of built-in test
applications. This model operates at +28 Vdc and features a high Output ENR level of 26 dB min, typical flatness across
the entire frequency band is +/- 2.0 dB, and excellent stability. Performance is specified over -55°C to +85°C with Noise
Output Temperature Variation <0.01 dB/°C, Noise Output Variation <0.1 dB/%V. The rugged package design supports an
output Female SMA connector with an EMI/RFI filter voltage pin and ground tab. Additionally, the model is designed to meet
a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock, and Vibration for
added confidence for highly reliable operation.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
6
GHz
Impedance 50 Ohms
Output ENR
26
dB
Flatness ±2 dB
VSWR 1.75:1
Output Variation vs Input Voltage
0.1
dB/%V
Output Variation vs Temperature
0.01
dB/deg C
Bias Voltage 1
28
Volts
Input Current 1
25
mA
Calibration Points
.
1 GHz Steps
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 26 dB, +28 VDC, 10 MHz to 6 GHz
PE85N1003
PE85N1003 REV 1.1
1