PE85N1003 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – 50 Ohm SMA Medium Power Noise Source With A Noise Output ENR Of 26 dB From 10 MHz to 6 GHz

50 Ohm SMA Medium Power Noise Source With A Noise
Output ENR Of 26 dB From 10 MHz to 6 GHz
Noise Generators Technical Data Sheet
PE85N1003
Features
• 10 MHz to 6 GHz Frequency Range
• Output Noise ENR 26 dB min
• Flatness 2.0 dB typ
Applications
• Measure Noise Figure
• Signal Strength Calibrators
.
• Radar
• Jamming
• 28 VDC Operation
• Small Size 1.25” by 0.75” by 0.50”
• SATCOM for BER and NF
• Source of Jitter
Description
The PE85N1003 is a coaxial Noise Source with 26 dB min of Output Noise ENR. The Unit features flatness better than +/- 2.0
dB over the frequency range 10 MHz to 6 GHz. The unit has an SMA Female DC Input Connector and an SMA Female RF
Output Connector. Standard operation is from +28 Vdc with a 20 mA maximum current draw. The Noise Source ideal for
noise figure measurements and built in test applications. The unit features a small profile housing of 1.25” by 0.75” by 0.50”
excluding connectors, ideal when space is at a premium.
Electrical Specifications
RF Characteristics
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
6
GHz
Impedance 50 Ohms
Output ENR
26
dB
Flatness ±2 dB
VSWR 1.75:1
Output Variation vs Input Voltage
0.1
dB/%V
Output Variation vs Temperature
0.01
dB/deg C
Bias Voltage 1
28
Volts
Input Current 1
25
mA
Calibration Points
1 GHz Steps
.
Mechanical Specifications
Size
Length
Width/Dia.
Height
.
.
Package Type
1.25 in [31.75 mm]
0.75 in [19.05 mm]
0.5 in [12.7 mm]
Connectorized Module
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 50 Ohm SMA Medium Power Noise Source With A Noise Output ENR Of 26 dB From 10 MHz
to 6 GHz PE85N1003
PE85N1003 REV 1.0
1