PE71S6196 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – SP6T Electromechanical Relay Switch DC to 10 GHz, N,160 Watts, 12V Control with Indicators, Normally Open, TTL

SP6T Electromechanical Relay Switch DC to 10 GHz, N,
160 Watts, 12V Control with Indicators, Normally Open, TTL
TECHNICAL DATA SHEET
PE71S6196
The PE71S6196 is a SP6T Switch that operates from DC to 10 GHz. The switch has a Normally Open actuator with
Indicators, TTL Control, and 1M life cycles. The switch has an operating voltage of +12 Volts.
Features
• SP6T Switch
• DC to 10 GHz Operating Frequency Range
• 1 M Cycles min
• Normally Open Switch
• Indicator
• TTL Control
Applications
• Test & Measurement
• Communications System
• Instrumentation
Electrical Specifications
Frequency Range
Impedance
Actuator
Actuating Current
Control Voltage
TTL Inputs (E): - High Level
- Low Level
TTL Control
Trigger
RF Input Power (Max CW)
DC to 10 GHz
50 Ohms
Indicators, Normally Open, TTL Logic
255 mA
12 Volts
2.4 to 5 Volts / at 5 Volts
0 to 0.8 Volts / at 0.8 Volts
“1”: On, “0”: Off, Enable: 5V, Disable: 0V
“on” = 2.4 Volts
“off” = 0.8 Volts
160 Watts
RF Characteristic
Description
Band 1
Band 2
Band 3
Band 4
Band 5
Units
Frequency Range
DC to 4
4 to 8
8 to 10
GHz
VSWR, Max
Insertion Loss, Max
1.25:1
0.25
1.4:1
0.4
1.6:1
0.6
dB
Isolation, Min
80
70
60 dB
.
Mechanical Specifications
Connector Type
Operating Life
Terminals
Switching Time (nominal voltage, 25°C)
Environmental Specifications
Temperature
Operating Range
N Female
1,000,000
Solder Pins
50 ms Max
-25 to +65 deg C
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SP6T Electromechanical Relay Switch DC to 10 GHz, N, 160 Watts, 12V Control with Indica-
tors, Normally Open, TTL PE71S6196
PE71S6196 REV 1.0
1