|
PE70A5001 Datasheet, PDF (1/7 Pages) Pasternack Enterprises, Inc. – Insertion Loss 5 dB Typ | |||
|
30 dB With 5 Bit Programmable TTL Controlled
Attenuator, 2.92mm Female To 2.92mm Female,
1 dB Steps From 100 MHz To 18 GHz
TECHNICAL DATA SHEET
PE70A5001
The PE70A5001 is a 5 Bit Programmable 30 dB Pin Diode Attenuator with Step Resolution as Low as 1 dB over the Operating
Frequency Range from 0.1 GHz to 18 GHz. The RF Input/Output Connectors are 2.92mm Female. Along with a 15 Pin Micro-D
Female Control Socket. The unit is shipped with a Micro-D Mating Connector.
Features
⢠5 Bit Programmable 30 dB Pin Diode Attenuator
⢠0.1 GHz to 18 GHz Frequency Range
⢠30 dB Attenuation Range
⢠Step Resolution of 1 dB
⢠Insertion Loss 5 dB Typ
⢠RF Connectors are 2.92mm Female
⢠15 Pin Micro-D Female Connector
Applications
⢠Electronic Warfare
⢠Test & Measurement
⢠Military & Space
⢠Radar
⢠Military Communications Systems
Electrical Specifications (Values at 25°C, sea level)
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.1
18
GHz
Mean Attenuation Range
0
30
dB
Insertion Loss 5 dB
Input VSWR 2.5:1
Power Rating 24 dBm
Input at 1 dB Compression Point
+20
dBm
Accuracy of Attenuation
0 dB to 30 dB ±2.5 dB
.
Step Size
1
dB
Switching Time
On Time
1
µs
Off Time
0.5
µs
.
DC Power Supply @ 50 mA
15
Volts
Logic Input
Logic â0â (Bit Off)
0 0.8
Volts
Logic â1â (Bit On)
2 5
Volts
.
..
Click the following link (or enter part number in âSEARCHâ on website) to obtain additional part information including price,
inventory and certifications: 30 dB With 5 Bit Programmable TTL Controlled Attenuator, 2.92mm Female To 2.92mm Fe-
male, 1 dB Steps From 100 MHz To 18 GHz PE70A5001
PE70A5001 REV 1.0
1
|
▷ |