PE3CA1107 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-020SR Coax, RoHS

Pigtail Test Probe Cable SMA Female to Flush
Cut Lead Using PE-020SR Coax, RoHS
RF Cable Assemblies Technical Data Sheet
Configuration
• Connector 1: SMA Female
• Connector 2: Flush Cut Lead
• Cable Type: PE-020SR
Features
• 100% RF Tested prior to final trim
• 1.35 Max VSWR to 6 GHz
• 100% High Pot Tested to 500V
• .020 Diameter Semi Rigid coax
• Individually packed in protective tube
PE3CA1107
Applications
• Used as an RF Test Probe to 6
GHz
.
• RF PCB board measurements
• Signal injection
Description
These SMA Female to unterminated flush cut cables assemblies are designed to be used as convenient test probes. The
unterminated end of the cable can be trimmed by the user to their desired dimensions. A common Research and development
application is to solder the trimmed end of the cable to an exposed microstrip trace to inject a signal or to measure a signal of
interest. Each cable assembly is individually packaged in a reusable protective tube. These test probes have been 100% RF
tested as a two ended assembly prior to trimming in order to verify the assemblies perform to 6 GHz with a maximum VSWR
of 1.35:1. Pre-Trimmed Test Probes are also available.
Electrical Specifications
Description
Minimum
Typical
Maximum
Units
Frequency Range
DC
6
GHz
VSWR 1.35:1
Operating Voltage (DC)
.
500
Vdc
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including
price, inventory and certifications: Pigtail Test Probe Cable SMA Female to Flush Cut Lead Using PE-020SR Coax, RoHS
PE3CA1107
PE3CA1107 REV 1.0
1