PE3CA1105 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – Pigtail Test Probe Cable SMA Female to Pre-Trimmed Lead Using PE-034SR Coax, RoHS

Pigtail Test Probe Cable SMA Female to Pre-
Trimmed Lead Using PE-034SR Coax, RoHS
RF Cable Assemblies Technical Data Sheet
Configuration
• Connector 1: SMA Female
• Connector 2: Pre-Trimmed Lead
• Cable Type: PE-034SR
Features
• 100% RF Tested prior to final trim
• 1.35 Max VSWR to 6 GHz
• 100% High Pot Tested to 500V
• .034 Diameter Semi Rigid coax
• Individually packed in protective tube
PE3CA1105
Applications
• Used as an RF Test Probe to 6
GHz
.
• RF PCB board measurements
• Signal injection
Description
These SMA Female to pre-trimmed cables assemblies are designed to be used as convenient test probes. The pre-trimmed
end of the cable assembly has an exposed center conductor and dielectric and is ready for use. A common Research and
development application is to solder the trimmed end of the cable to an exposed microstrip trace to inject a signal or to mea-
sure a signal of interest. Each cable assembly is individually packaged in a reusable protective tube. These test probes have
been 100% RF tested as a two ended assembly prior to trimming in order to verify the assemblies perform to 6 GHz with a
maximum VSWR of 1.35:1. Flush Cutt Test Probes are also available.
Electrical Specifications
Description
Minimum
Typical
Maximum
Units
Frequency Range
DC
6
GHz
VSWR 1.35:1
Operating Voltage (AC)
.
500
Vrms
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: Pigtail Test Probe Cable SMA Female to Pre-Trimmed Lead Using PE-034SR Coax, RoHS
PE3CA1105
PE3CA1105 REV 1.0
1