PE20S0003 Datasheet, PDF (1/8 Pages) Pasternack Enterprises, Inc. – High Power Handling Capability

4 Way High Power Broadband Combiner From 20 MHz
to 1,000 MHz Rated at 300 Watts, Type N
TECHNICAL DATA SHEET
PE20S0003
PE20S0003 is a passive 4 way High Power Broadband RF Combiner with 50 ohm N connectors operating from 20 to 1000
MHz, with a max input power at 300 watts. The PE20S0003 has greater than 12 dB typical isolation, less than 0.75 dB typical
low insertion loss and a Max VSWR of 1.25:1; along with a phase balance of ±5 degrees and an amplitude balance of ±0.25
dB. The RF Combiner operates in a temperature range from -55°C to 85°C, with a foot print of 5.10”x4.72”x1.54”.
Features
• 20 to 1000 MHz Frequency
• 300 watt max power
• Insertion Loss: < 0.75 dB
• Phase Balance: ±5 degrees
Applications
• Communications Systems
• Power Combining
• PCS,GSM,LTE, Cellular
• Amplitude Balance: ±0.25 dB
• Isolation: >12 dB
• High Power Handling Capability
• Amplifier Systems
• Amplifier Power Combining
• Wireless Infrastructures
• Defence Applications
Configuration
Input Connectors
Output Connector
Frequency Range
Design
Number of Input Ports
Housing Material and Plating
N Female
N Female
20 to 1,000 MHz
Reactive
4
Aluminum Alloy
Electrical Specifications (Values at 25°C, sea level)
Description
Minimum
Typical
Maximum
Units
Frequency Range
20
1,000
MHz
Impedance 50 Ohms
Insertion Loss
Input Power
0.75
dB
300
Watts
Output VSWR 1.25:1
Isolation
12 dB
Phase Balance
± 5
Degrees
Flatness ±0.25 dB
.
Specifications by Frequency
Description
Range
Isolation
F1
20 to 125
12
F2
F3
F4
F5
Units
125 to 1,000
MHz
15 dB
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 4 Way High Power Broadband Combiner From 20 MHz to 1,000 MHz Rated at 300 Watts,
Type N PE20S0003
PE20S0003 REV 1.0
1