|
PE1V13008_16 Datasheet, PDF (1/7 Pages) Pasternack Enterprises, Inc. – Surface Mount (SMT) Voltage Controlled Oscillator (VCO) From 75 MHz to 150 MHz, Phase Noise of -110 dBc/Hz and 0.5 inch Package | |||
|
Surface Mount (SMT) Voltage Controlled Oscillator
(VCO) From 75 MHz to 150 MHz, Phase Noise of
-110 dBc/Hz and 0.5 inch Hermetic Package
Voltage Control Oscillators Technical Data Sheet
PE1V13008
Features
⢠75 MHz to 150 MHz Bandwidth
⢠-110 dBc/Hz @ 10kHz offset
⢠Tuning Voltage 0.0V to 18V
⢠Pout = +11 dBm
⢠Harmonics = -20 dBc
⢠RoHs Compliant Assembly
Applications
⢠Phase Locked Loop
⢠Function Generators
⢠Frequency Synthesizers
⢠Receivers
.
⢠Hermetically Sealed Rugged SMT Package
⢠Designed to meet Fine & Gross leak per MIL-STD-883
Method 1014
⢠Designed to meet MIL-STD-202 Environmental Condi-
tions
⢠Electronic Jamming Equipment
⢠Local Oscillator
⢠Wireless Communications
⢠SATCOM
⢠Optical Communications
⢠Military Electronic Systems
Description
The PE1V13008 is a High Reliability Low Noise Voltage Controlled Oscillator (VCO) which covers a 75 MHz to 150 MHz
frequency band with a voltage tuning range from 0.0V to 18V. This design features exceptional phase noise performance of
-110 dBc/Hz @ 10 kHz offset. Supply Voltage is +15V with a generated output power level of +11 dBm and 2nd harmonic
output of -20 dBc typical. The assembly is RoHs compliant and available in a hermetically sealed 0.5â surface mount package
with exposed leads that meets MIL-STD-883, Method 1014 fine & Gross leak conditions. This rugged package operates
over a temperature range of -40oC to +85oC and is designed to also meet a variety of MIL-STD-202 test conditions including
Humidity, Shock, and Vibration.
Electrical Specifications
Description
Minimum
Typical
Maximum
Units
Frequency Range
75
150
MHz
Tuning Voltage
0
18
Vdc
Supply Voltage (DC)
14
15
16
Vdc
Supply Current (DC)
18
20
mA
Phase Noise @ 1kHz Offset
-83
-80
dBc/Hz
Phase Noise @ 10kHz Offset
-110
-108
dBc/Hz
Phase Noise @ 100kHz Offset
-130
-129
dBc/Hz
Output Power
+10
+11
+12
dBm
Tuning Sensitivity (Kvco)
3
8
MHz/V
Pushing 0.2
0.4
MHz/V
Pulling (pk-pk)
400
800
KHz
Tuning Port Capacitance
100
pF
Load Impedance 50 Ohms
2nd Harmonics
-20
-15
dBc
..
Click the following link (or enter part number in âSEARCHâ on website) to obtain additional part information including price,
inventory and certifications: Surface Mount (SMT) Voltage Controlled Oscillator (VCO) From 75 MHz to 150 MHz, Phase
Noise of -110 dBc/Hz and 0.5 inch Hermetic Package PE1V13008
PE1V13008 REV 1.0
1
|
▷ |