|
PE1V13001 Datasheet, PDF (1/7 Pages) Pasternack Enterprises, Inc. – 0.5 inch Hermetic Surface Mount (SMT) Voltage Controlled Oscillator (VCO) From 18 MHz to 30 MHz With Phase Noise of -120 dBc/Hz | |||
|
0.5 inch Hermetic Surface Mount (SMT) Voltage
Controlled Oscillator (VCO) From 18 MHz to
30 MHz With Phase Noise of -120 dBc/Hz
Voltage Control Oscillators Technical Data Sheet
PE1V13001
Features
⢠18 to 30 MHz Bandwidth
⢠-120 dBc/Hz @ 10kHz offset
⢠Tuning Voltage 0.5V to 12V
⢠Pout = +12 dBm
⢠Harmonics = -13 dBm
⢠RoHs Compliant Assembly
Applications
⢠Phase Locked Loop
⢠Function Generators
⢠Frequency Synthesizers
⢠Receivers
.
⢠Hermetically Sealed Rugged SMT Package
⢠Designed to meet Fine & Gross leak per MIL-STD-883
Method 1014
⢠Designed to meet MIL-STD-202 Environmental Condi-
tions
⢠Electronic Jamming Equipment
⢠Local Oscillator
⢠Wireless Communications
⢠SATCOM
⢠Optical Communications
⢠Military Electronic Systems
Description
The PE1V13001 is a High Reliability Low Noise Voltage Controlled Oscillator (VCO) which covers a 18 MHz to 30 MHz
frequency band with a voltage tuning range from 0.5V to 12V. This design features exceptional phase noise performance of
-120 dBc/Hz @ 10 kHz offset. Supply Voltage is +12V with a generated output power level of +12.0 dBm and 2nd harmonic
output of -13 dBc typical. The assembly is RoHs compliant and available in a hermetically sealed 0.5â surface mount package
with exposed leads that MIL-STD-883, Method 1014 fine & Gross leak conditions. This rugged package operates over
a temperature range of -40oC to +85oC and is designed to also meet a variety of MIL-STD-202 test conditions including
Humidity, Shock, and Vibration.
Electrical Specifications
Description
Minimum
Typical
Maximum
Units
Frequency Range
18 30
MHz
Tuning Voltage
0
12
Vdc
Supply Voltage (DC)
11
12
13
Vdc
Supply Current (DC)
16
19
mA
Phase Noise @ 1kHz Offset
-95
-92
dBc/Hz
Phase Noise @ 10kHz Offset
-120
-118
dBc/Hz
Phase Noise @ 100kHz Offset
-140
-138
dBc/Hz
Output Power
+10
+12
+13.5
dBm
Tuning Sensitivity (Kvco)
0.9
1.8
MHz/V
Pushing 0.03
0.05
MHz/Volt
Pulling (pk-pk)
70
100
KHz
Tuning Port Capacitance
100
pF
Load Impedance 50 Ohms
2nd Harmonics
-13
-12
dBc
..
Click the following link (or enter part number in âSEARCHâ on website) to obtain additional part information including price,
inventory and certifications: 0.5 inch Hermetic Surface Mount (SMT) Voltage Controlled Oscillator (VCO) From 18 MHz to
30 MHz With Phase Noise of -120 dBc/Hz PE1V13001
PE1V13001 REV 1.0
1
|
▷ |