PE15A4025 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – Unconditionally Stable

2 Watt P1dB, 1 GHz to 2 GHz, Medium Power Amplifier,
35 dB Gain, 45 dBm IP3, 1.5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A4025
PE15A4025 is a L-band coaxial 2W high dynamic range power amplifier, operating in the 1 to 2 GHz frequency range and
designed for low noise and high linearity applications. The amplifier offers 33 dBm of P1dB and high 35 dB small signal gain,
with the excellent gain flatness of ±1.0 dB max, along with an outstanding IP3 performance of 45 dBm and 1.5 dB Noise Figure.
This performance is achieved through using hybrid MIC design and advanced GaAs PHEMT devices. This power amplifier
requires only a single positive DC supply, Unconditionally stable, and operates over the temperature range of -40°C to 75°C.
Features
• 1 GHz to 2 GHz Frequency Range
• P1dB: 33 dBm
• High Small Signal Gain: 35 dB
• Gain Flatness: ±0.75 dB
• Gain Variation: ±1.25 dB
• Output IP3: 45 dBm
• Noise Figure: 1.5 dB
• Reverse Isolation: 55 dB
• 50 Ohm Input and Output Matched
• -40 to +75°C Operating Temperature
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Satellite Communications
• Wireless Communications
• Microwave Radio Systems
• Power Amplifier
• Low Noise Amplifier
• High Dynamic Range Amplifier
• General Purpose Amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts DC Current = 800mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
1
2
GHz
Small Signal Gain
32
35
dB
Gain Flatness
±0.75
±1
dB
Output at 1 dB Compression Point
+32
+33
dBm
Output 3rd Intercept Point
+40
+45
dBm
Reverse Isolation
55
dB
Noise Figure
1.5
2
dB
Input VSWR
1.5:1
1.7:1
Output VSWR
1.5:1
1.7:1
Operating DC Voltage
11.5
12
13
Volts
Operating DC Current
800
1,500
mA
Operating Temperature Range
-40
+75
°C
.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 2 Watt P1dB, 1 GHz to 2 GHz, Medium Power Amplifier, 35 dB Gain, 45 dBm IP3, 1.5 dB NF,
SMA PE15A4025
PE15A4025 REV 1.0
1