PE15A3901 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – 50 Ohm Input and Output Matched

10 dBm P1dB, 50 MHz to 40 GHz, USB Controlled
Broadband Amplifier, 12 dB Gain, 2.92mm
TECHNICAL DATA SHEET
PE15A3901
The PE15A3901 is a broadband amplifier covering 50 MHz to 40 GHz. The amplifier has a 12 dB of typical Gain, +/- 2.5
dB typical flatness and a P1dB of +10 dBm typical. This amplifier is controlled and powered via USB 2.0 with driverless
installation, so no external power supply is required.
Features
• 0.05 GHz to 40 GHz Frequency Range
• P1dB: 10 dBm typ
• Small Signal Gain: 12 dB typ
• Gain Flatness: ±2.5 dB typ
• Noise Figure: 4.5 dB typ to 20 GHz, 5.5 dB typ to 40
GHz
• 50 Ohm Input and Output Matched
• Unconditionally Stable
• USB type a plug DC Positive Supply
• Built-in Voltage Regulator
• 2.92 mm female Input/Output Connectors
Applications
• Laboratory Applications
• R&D Labs
• Military Radio
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C)
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.05
40
GHz
Gain
12
dB
Gain Flatness
±2.5
dB
Output at 1 dB Compression Point
+10
dBm
Noise Figure at 0.05 to 20 GHz
4.5
dB
Noise Figure at 20 to 40 GHz
5.5
dB
Input VSWR
2.3:1
Output VSWR
2.3:1
Operating Temperature Range (OTR)
-40
+85
°C
..
Mechanical Specifications
.
Input Connector
Output Connector
2.92mm
2.92mm
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 10 dBm P1dB, 50 MHz to 40 GHz, USB Controlled Broadband Amplifier, 12 dB Gain, 2.92mm
PE15A3901
PE15A3901 REV 1.0
1