PE15A1028 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz

40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz
to 1.6 GHz, Low Noise Amplifier, SMA
TECHNICAL DATA SHEET
PE15A1028
PE15A1028 is a wideband low noise RF coaxial power amplifier operating in the 1.2 GHz to 1.6 GHz frequency range. The
amplifier offers 0.7 dB noise figure typical, 12 dBm of P1dB and 40 dB small signal gain with gain flatness of ±1.0 dB. The
low noise amplifier requires typically a +12V DC power supply and is unconditionally stable. The amplifier operates over the
temperature range of -40°C and +85°C.
Features
• 1.2 GHz to 1.6 GHz Frequency Range
• Noise Figure: 0.7 dB typ
• P1dB: 12 dBm
• Flat Small Signal Gain: 40 dB
• Gain Flatness: ±1 .0 dB
• 50 Ohm Input and Output Matched
• -40 to 85°C Operating Temperature
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Microwave Radio Systems
• Satellite Communications
• Low Noise Amplifier
• General Purpose Amplification
• Gain Block
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts,)
Description
Minimum
Typical
Maximum
Units
Frequency Range
1.2
1.6
GHz
Small Signal Gain
40
dB
Gain Flatness
±1
dB
Output at 1 dB Compression Point
+12
dBm
Noise Figure
0.7
dB
Input VSWR
2:1
Output VSWR
2:1
Operating DC Voltage
11
12
13
Volts
Operating Temperature Range
-40
+85
°C
..
Mechanical Specifications
Size
Length
Width
Height
.
Input Connector
Output Connector
1.5 in [38.1 mm]
0.85 in [21.59 mm]
0.375 in [9.53 mm]
SMA Female
SMA Female
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including
price, inventory and certifications: 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA
PE15A1028
PE15A1028 REV 1.0
1