English
Language : 

PE15A1019 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – 1 GHz to 2 GHz Frequency Range
40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB,
1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA
TECHNICAL DATA SHEET
PE15A1019
PE15A1019 is a wideband low noise RF coaxial power amplifier operating in the 1 GHz to 2 GHz frequency range. The
amplifier offers 0.8 dB noise figure typical, 11 dBm of P1dB and 40 dB small signal gain with gain flatness of ±1.0 dB. The
low noise amplifier requires typically a +10V DC power supply and is unconditionally stable. The amplifier operates over the
temperature range of -40°C and +85°C.
Features
• 1 GHz to 2 GHz Frequency Range
• Noise Figure: 0.8 dB typ
• P1dB: 11 dBm
• Flat Small Signal Gain: 40 dB
• Gain Flatness: ±1 .0 dB
• Gain Variance over OTR: ±1 .0 dB
• 50 Ohm Input and Output Matched
• -40 to 85°C Operating Temperature
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Military Radio
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 10Volts, DC Current = 120mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
1
2
GHz
Small Signal Gain
37
40
43
dB
Gain Flatness
±1
dB
Gain Variance at OTR*
±1
dB
Output at 1 dB Compression Point
+11
dBm
Output 3rd Intercept Point
+22
+25
dBm
Noise Figure
0.8
1
dB
Input VSWR
1.7:1
2:1
Output VSWR
1.6:1
2:1
Spurious
-60
dBc
Operating DC Voltage
9
10
12
Volts
Operating DC Current
100
120
135
mA
Operating Temperature Range
-40
+85
°C
..
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain
Amplifier SMA PE15A1019
PE15A1019 REV 1.0
1