PE15A1018 Datasheet, PDF (1/6 Pages) Pasternack Enterprises, Inc. – 34 dBm IP3, 2.6 dB NF, 20 dBm P1dB, 500 MHz to 3 GHz, Low Noise Amplifier, 29 dB Gain, SMA

34 dBm IP3, 2.6 dB NF, 20 dBm P1dB, 500 MHz to
3 GHz, Low Noise Amplifier, 29 dB Gain, SMA
TECHNICAL DATA SHEET
PE15A1018
The PE15A1018 is a low noise RF coaxial power amplifier operating in the 500 MHz to 3 GHz frequency range. The amplifier
offers Noise Figure of 2.6 dB typ, 20 dBm min of P1dB and 29 dB typ of small signal gain. This exceptional technical performance
is achieved through the use of hybrid MIC design and advanced GaAs E-pHEMT devices. The low noise amplifier requires an
operating voltage between +5 VDC and +12VDC power supply. The connectorized SMA module is unconditionally stable and
includes built-in voltage regulation, bias sequencing.
Features
• 500 MHz to 3 GHz Frequency Range
• P1dB: 20 dBm typ
• Small Signal Gain: 29 dB typ
• Noise Figure: 2.6 dB typ
• 50 Ohm Input and Output Matched
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 190mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.5
3
GHz
Small Signal Gain
29
dB
Gain Flatness
±1
dB
Output at 1 dB Compression Point
+20
dBm
Output 3rd Intercept Point
+31
+34
dBm
Noise Figure
2.6
3
dB
Input VSWR
1.93:1
Output VSWR
1.93:1
Operating DC Voltage
5
12
Volts
Operating DC Current
190
mA
..
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 34 dBm IP3, 2.6 dB NF, 20 dBm P1dB, 500 MHz to 3 GHz, Low Noise Amplifier, 29 dB Gain,
SMA PE15A1018
PE15A1018 REV 1.0
1