PE15A1013 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – Low Noise High Gain Amplifier SMA

50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm, 10 MHz to
1,000 MHz, Low Noise High Gain Amplifier SMA
TECHNICAL DATA SHEET
PE15A1013
PE15A1013 is a wideband low noise RF coaxial power amplifier operating in the 10 MHz to 1 GHz frequency range. The
amplifier offers 1 dB noise figure, 18 dBm of P1dB and 50 dB small signal gain with gain flatness of ±1.25 dB. This exceptional
technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. The low noise
amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally stable and includes
built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The amplifier operates over the
temperature range of -40°C and +85°C.
Features
• 10 MHz to 1 GHz Frequency Range
• P1dB: 18 dBm
• Flat Small Signal Gain: 50 dB
• Gain Flatness: ±1 .25 dB
• Gain Variance over OTR: ±1 .5 dB
• Noise Figure: 1 dB
• Reverse Isolation: 65 dB
• 50 Ohm Input and Output Matched
• -40 to 85°C Operating Temperature
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Military Radio
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 130mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
10
1,000
MHz
Small Signal Gain
47
50
54
dB
Gain Flatness
±1.25
±1.5
dB
Gain Variance at OTR*
±1.5
dB
Output at 1 dB Compression Point
+16
+18
dBm
Output 3rd Intercept Point
+26
+28
dBm
Noise Figure
1
1.1
dB
Input VSWR
1.5:1
1.7:1
Output VSWR
1.6:1
1.8:1
Reverse Isolation
60
65
dB
Spurious
-60
dBc
Operating DC Voltage
10
12
15
Volts
Operating DC Current
100
130
160
mA
Operating Temperature Range
-40
+85
°C
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm, 10 MHz to 1,000 MHz, Low Noise High Gain
Amplifier SMA PE15A1013
PE15A1013 REV 1.0
1