PE15A1009 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – 1.4 dB NF, 11 dBm, 10 MHz to 3 GHz, Low Noise Amplifier

1.4 dB NF, 11 dBm, 10 MHz to 3 GHz, Low
Noise Amplifier, 34 dB Gain, SMA
TECHNICAL DATA SHEET
PE15A1009
PE15A1009 is a wideband low noise RF coaxial power amplifier operating in the 10 MHz to 3 GHz frequency range. The
amplifier offers 1.4 dB noise figure, 11 dBm of P1dB and 34 dB small signal gain with the excellent gain flatness of ±0.75dB
max. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT
devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally
stable and includes built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The amplifier
operates over the temperature range of -40°C and +85°C.
Features
• 10 MHz to 3 GHz Frequency Range
• P1dB: 11 dBm
• Flat Small Signal Gain: 34 dB
• Gain Flatness: ±0.75 dB
• Gain Variance over OTR: ±1.25 dB
• Noise Figure: 1.4 dB
• Reverse Isolation: 50 dB
• 50 Ohms Input and Output Matched
• -40 to 85°C Operating Temperature
• Unconditionally Stable
• Regulated Supply & Bias Sequencing
• Overvoltage Protection
Applications
• Laboratory Applications
• R&D Labs
• Military Radio
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 95mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.01
3
GHz
Small Signal Gain
32.5
34
36.5
dB
Gain Flatness
±0.75
±1
dB
Gain Variance at OTR*
±1.25
dB
Output at 1 dB Compression Point
+10
+11
dBm
Noise Figure
1.4
1.65
dB
Input VSWR
1.4:1
1.6:1
Output VSWR
1.4:1
1.6:1
Reverse Isolation
40
50
dB
Operating DC Voltage
10
12
15
Volts
Operating DC Current
85
95
105
mA
Operating Temperature Range
-40
+85
°C
..
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 1.4 dB NF, 11 dBm, 10 MHz to 3 GHz, Low Noise Amplifier, 34 dB Gain, SMA PE15A1009
PE15A1009 REV 1.0
1