PE15A1008 Datasheet, PDF (1/5 Pages) Pasternack Enterprises, Inc. – 23 dBm IP3, 1.6 dB NF, 13 dBm, 20 MHz to 3 GHz, Low Noise Amplifier

23 dBm IP3, 1.6 dB NF, 13 dBm, 20 MHz to 3 GHz,
Low Noise Amplifier, 25 dB Gain, SMA
TECHNICAL DATA SHEET
PE15A1008
PE15A1008 is a wideband low noise RF coaxial power amplifier operating in the 20 MHz to 3 GHz frequency range. The
amplifier offers 1.6 dB noise figure, 13 dBm of P1dB and 25 dB small signal gain with the excellent gain flatness of ±0.75 dB
max. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT
devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally
stable and includes built-in voltage regulation. This low noise amplifier requires only a single positive supply, is unconditionally
stable and operates over the temperature range of -40°C and +85°C.
Features
• 20 MHz to 3 GHz Frequency Range
• P1dB: 13 dBm
• Flat Small Signal Gain: 25 dB
• Gain Flatness: ±0.75 dB
• Output IP3: 23 dBm
• Noise Figure: 1.6 dB
• Reverse Isolation: 50 dB
• 50 Ohm Input and Output Matched
• -40 to 85°C Operating Temperature
• Unconditionally Stable
• Single DC Positive Supply
• Built-in Voltage Regulator
Applications
• Laboratory Applications
• R&D Labs
• Military Radio
• Radar Systems
• Telecom Infrastructure
• Test Instrumentation
• Military & Space
• Communication Systems
• Wireless Communication
• Microwave Radio Systems
• Cellular Base Stations
• Low Noise Amplifier
• General Purpose Amplification
• General Purpose Wireless
• Wideband Gain Block
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
• RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 75mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
0.02
3
GHz
Small Signal Gain
22.5
25
27
dB
Gain Flatness
±0.75
±1
dB
Gain Variance at OTR*
±1.25
dB
Output at 1 dB Compression Point
+12
+13
dBm
Output 3rd Intercept Point
+20
+23
dBm
Noise Figure
1.6
1.8
dB
Input VSWR
1.5:1
1.8:1
Output VSWR
1.5:1
1.8:1
Reverse Isolation
40
50
dB
Spurious
-60
dBc
Operating DC Voltage
10
12
15
Volts
Operating DC Current
65
75
120
mA
Operating Temperature Range
-40
+85
°C
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 23 dBm IP3, 1.6 dB NF, 13 dBm, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA
PE15A1008
PE15A1008 REV 1.0
1