PE-W19AT001-30 Datasheet, PDF (1/3 Pages) Pasternack Enterprises, Inc. – Rugged waveguide configuration

0 to 30 dB Waveguide Continuously Variable Attenuator,
WR-19, From 40 GHz To 60 GHz, UG383/U-Mod Flange
TECHNICAL DATA SHEET
PE-W19AT001-30
Pasternack’s Continuously Variable Waveguide Attenuators are offered for the frequency range of 33 to 110 GHz in five
waveguide bands. The attenuation value of the Continuously Variable attenuators are from 0 to 30 dB with full waveguide
operational bandwidth. The Continuously Variable attenuators are equipped with a micrometer, which enables rapid re-setting.
With calibrated charts, attenuators can be used as direct reading attenuator for bench top test set use. The level setting
attenuators are typically used in the test setups and prototype assemblies where certain attenuation is required.
• U-Band
• Rugged waveguide configuration
• Full band operation
• Up to 30 dB attenuation
• Low cost
Configuration
Design
Waveguide
Flange
Body Material and Plating
Continuously Variable Attenuator
WR-19
UG383/U-Mod
Copper, Gold
Electrical Specifications Values at 25°C, sea level
Description
Minimum
Typical
Maximum
Units
Frequency Range
40
60
GHz
Impedance 50 Ohms
Typical Attenuation Value
0
30
dB
Insertion Loss
0.6
dB
.
Mechanical Specifications
Description
Interface
Material
Plating
Color
...
Flange 1
UG383/U-Mod
Copper
Gold
Gold
Waveguide
WR-19
Copper
Gold
Gold
Size
Length
Width
Height
.
2.5 in [63.5 mm]
1.125 in [28.58 mm]
2.5625 in [65.09 mm]
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Flange 2
UG383/U-Mod
Copper
Gold
Gold
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 0 to 30 dB Waveguide Continuously Variable Attenuator, WR-19, From 40 GHz To 60 GHz,
UG383/U-Mod Flange PE-W19AT001-30
PE-W19AT001-30 REV 1.0
1