PE-T2017 Datasheet, PDF (1/4 Pages) Pasternack Enterprises, Inc. – Low Loss 20 dB N Unequal Tapper Optimized For Mobile

Low Loss 20 dB N Unequal Tapper Optimized For Mobile
Networks From 380 MHz to 6 GHz Rated To 300 Watts
TECHNICAL DATA SHEET
PE-T2017
Pasternack’s Line of High Power Wideband Tappers have been designed to maintain a Split Ratio across all frequencies
between 380MHz and 6Ghz. There is minimal Insertion Loss, VSWR, and Low PIM. Mechanically the parts have no solder
joints inside the Aluminum Casing and are IP65 / IP67 rated allowing for placement in rugged environments. This setup along
with select bands optimization makes them ideal for Mobile Networks Infrastructure.
• Split Ratios Ranging from 1:3 to 1:1000
• Power Ratings up to 300 Watts
• Low PIM (150dBc) Low VSWR (1.15)
• Rugged Designs available with optional mounting brackets
Configuration
Design
Frequency Range, GHz
Input
Output
Sample Port
Number of Output Ports
Housing Material and Plating
Low Loss Tapper
0.38 to 6
N Female
N Female
N Female
2
Passivated Aluminum
Electrical Specifications
Split Ratio
Number of Bands
Impedance, Ohms
Maximum Insertion Loss, dB *
Maximum Input Power, Watts
Maximum Input VSWR
Peak Input Power, KWatts
Passive Intermodulation (2 x 43 dBm), dBc
Band 1
Frequency, GHz
Coupling Tolerance, dB
VSWR
Band 2
Frequency, GHz
Coupling Tolerance, dB
VSWR
Band 3
Frequency, GHz
Coupling Tolerance, dB
VSWR
1:99
4
50
0.57
300
1.15:1
3
150
0.38 to 1.55
1
1.15
1.65 to 2.7
1
1.15:1
3.4 to 4.5
3
1.15:1
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: Low Loss 20 dB N Unequal Tapper Optimized For Mobile Networks From 380 MHz to 6 GHz
Rated To 300 Watts PE-T2017
PE-T2017 REV 1.2
1