PE-T1012 Datasheet, PDF (1/3 Pages) Pasternack Enterprises, Inc. – 50 Ohm 3 Way N Equal Tapper Optimized For Mobile Networks From 700 MHz to 2.7 GHz Rated at 500 Watts

50 Ohm 3 Way N Equal Tapper Optimized For Mobile
Networks From 700 MHz to 2.7 GHz Rated at 500 Watts
TECHNICAL DATA SHEET
PE-T1012
50 Ohm 3 Way N Power Divider Optimized For Mobile Networks From 700 MHz to 2.7 GHz Rated at
500 Watts
Pasternack’s RF Tapper Power Dividers are designed to be wideband and low loss, with minimal reflections across Mobile
Network bands between 380 MHz and 6 GHz. Their Air Dielectric and no Solder Joint designs make them ideal for indoor
use, while the rugged construction ensures IP65 or IP67 outdoor performance.
• Optimized at Mobile Network Frequencies between 380 MHz to 6 GHz
• Low Loss and Low PIM, with VSWR as low as 1.15
• IP65 or IP67 Rated
• Available with High Power N or 7/16 DIN style connectors
Configuration
Input Connector
Output Connectors
Frequency Range, GHz
Number of Output Ports
Housing Material and Plating
N Female
N Female
0.7 to 2.7
3
Aluminum, Conversion Coating
Electrical Specifications
Frequency Range, GHz
Impedance, Ohms
Maximum Insertion Loss, dB
Maximum Input Power, Watts
Maximum Input VSWR
Peak Input Power, KWatts
0.7 to 2.7
50
4.85
500
1.15:1
3
Mechanical Specifications
Size
Length, in [mm]
Width, in [mm]
Height, in [mm]
.
Weight, lbs [g]
Humidity
Input Connector
Contact Material and Plating
Connector Material and Plating
Body Material and Plating
Output Connectors
Contact Material and Plating
Connector Material and Plating
Body Material and Plating
10.23 [259.84]
3.2 [81.28]
1 [25.4]
0.87 [394.63]
IP65
Brass, Silver
Brass, Silver
Brass, Silver
Brass, Nickel
Brass, Nickel
Brass, Nickel
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 50 Ohm 3 Way N Equal Tapper Optimized For Mobile Networks From 700 MHz to 2.7 GHz
Rated at 500 Watts PE-T1012
PE-T1012 REV 1.0
1