LMR-195 Datasheet, PDF (1/2 Pages) Pasternack Enterprises, Inc. – Flexible Low Loss Communications Coax

TIMES MICROWAVE SYSTEMS
LMR^®-195
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• Drop-in replacement for RG-58 and RG-142
• LMR^® standard is a UV Resistant Polyethylene jacketed
cable designed for 20-year service outdoor use. The
bending and handling characteristics are significantly better
than air-dielectric and corrugated hard-line cables.
• LMR^®- DB is identical to standard LMR plus has the
advantage of being watertight. The addition of
waterproofing compound in and around the foil/braid
insures continuous reliable service should the jacket be
inadvertently damaged during installation or in the future.
• LMR^®- FR is a non-halogen (non-toxic), low smoke,
fire retardant cable designed for in-building runs that can
be routed anywhere except air handling plenums.
LMR-FR is UL/NEC & CSA rated‘CMR’ and ‘FT4’
respectively, meets FAA FAR25 requirements and is
MSHA-P for mining applications.
• LMR^®- FR-PVC is a general-purpose indoor cable
and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’
respectively. It is less expensive than LMR-FR, however
it emits toxic fumes (HCL) and greater smoke density
when burned.
• LMR^®- PVC is designed for low loss general-purpose
applications and is somewhat more flexible
than the standard polyethylene jacketed LMR.
• LMR^®- PVC-W is a white-jacketed version of LMR-
PVC for marine and other applications
where color compatibility is desired.
• LMR^®- MA is a flexible cable designed specifically
for mobile antenna applications.It has a PVC jacket and
un-bonded aluminum tape to facilitate end stripping with
automated equipment.
• Flexibility and bendability are hallmarks of the LMR-
195 cable design. The flexible outer conductor enables
the tightest bend radius available for any cable of similar
size and performance.
• Low Loss is another hallmark feature of LMR-195.
Size for size LMR has the lowest loss of any flexible
cable and comparable loss to semirigid hard-line
cables.
• RF Shielding is 50 dB greater than typical single
shielded coax (40 dB).The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
dB between two adjacent cables).
• Weatherability: LMR-195 cables designed for
outdoor exposure incorporate the best materials for UV
resistance and have life expectancy in excess of 20 years.
• Connectors:Awide variety of connectors are available
for LMR-195 cable, including all common interface types,
reverse polarity, and a choice of solder or non-solder
center pins.Most LMR connectors employ crimp outer
attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-195 cable types are
available as pre-terminated cable assemblies.Refer to
the section on FlexTech for further details.

Part Description
Stock
Part Number
Application
Jacket Color Code
LMR-195
Outdoor
PE Black 54110
LMR-195-DB
Outdoor/Watertight
PE Black 54113
LMR-195-FR Indoor/Outdoor Riser CMR FRPE Black 54111
LMR-195-FR-W Indoor/Outdoor Riser CMR FRPE White 54158
LMR-195-FR-PVC Indoor/Outdoor Riser CMR FRPVC Black 54105
LMR-195-MA
Mobile Antennas
PVC Black 54210
LMR-195-PVC
General Purpose
PVC Black 54215
LMR-195-PVC-W General Purpose
PVC White 54199
Construction Specifications
Description
Material
In.
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BC
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.037
0.110
0.116
0.139
0.195
(mm)
(0.94)
(2.79)
(2.95)
(3.53)
(4.95)
10
(800) TMS-COAX • www.timesmicrowave.com