LMR-100A Datasheet, PDF (1/2 Pages) Pasternack Enterprises, Inc. – Flexible Low Loss Communications Coax

TIMES MICROWAVE SYSTEMS
LMR^®-100A
Flexible Low Loss Communications Coax
Ideal for…
• Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• LMR^®- PVC is designed for low loss general-purpose
indoor/outdoor applications and is somewhat more flexible
than the standard polyethylene jacketed LMR.
• LMR^®- PVC-W is a white-jacketed version of LMR-
Construction Specifications
PVC for marine and other indoor/outdoor applications _Description
Material
In.
(mm)
where color compatibility is desired.
Inner Conductor
• Flexibility and bendability are hallmarks of the LMR- Dielectric
Solid BCCS
Solid PE
0.018
0.060
(0.46)
(1.52)
100Acable design. The flexible outer conductor enables
the tightest bend radius available for any cable of similar
size and performance.
• Low Loss is another hallmark feature of LMR-100A.
Size for size LMR has the lowest loss of any flexible cable
and comparable loss to semirigid hard-line cables.
• RF Shielding is 50 dB greater than typical single
shielded coax (40 dB).The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
Outer Conductor
Overall Braid
Jacket
Aluminum Tape
Tinned Copper
(see table above)
0.065
0.083
0.110
(1.65)
(2.11)
(2.79)
Mechanical Specifications
Performance Property
Units
US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
in. (mm)
in. (mm)
ft-lb (N-m)
lb/ft (kg/m)
lb (kg)
0.25
1
0.1
0.0092
15
(6.4)
(25.4)
(0.014)
(.014)
(6.8)
dB between two adjacent cables).
Flat Plate Crush
lb/in. (kg/mm)
10
(0.18)
• Weatherability: LMR-100A cables designed for
outdoor exposure incorporate the best materials for UV
Environmental Specifications
Performance Property
0_F
o_C
resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available
for LMR-100A cable, including all common interface
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
-40/+185
-94/+185
-40/+185
-40/+85
-70/+85
-40/+85
types, reverse polarity, and a choice of solder or non-
solder center pins.Most LMR connectors employ crimp
outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-100A cable types are
Electrical Specifications
Performance Property
Units
US (metric)
Velocity of Propagation
Dielectric Constant
Time Delay
%
NA
nS/ft (nS/m)
66
2.30
1.54
(5.05)
available as pre-terminated cable assemblies.Refer to ^Impedance
the section on FlexTech for further details.
Capacitance
Inductance
ohms
pF/ft (pF/m)
uH/ft (uH/m)
50
30.8
0.077
(101.1)
(0.25)
Shielding Effectiveness
dB
>90
DC Resistance

Part Description
Stock _{Inner Conductor}
ohms/1000ft (/km) 81.0
(266)
Part Number
Application
Jacket Color Code Outer Conductor
ohms/1000ft (/km) 9.5
(31.2)
LMR-100A-FR Indoor/Outdoor Riser CMR
LMR-100A-PVC Indoor/Outdoor
LMR-100A-PVC-W Indoor/Outdoor
FRPE
PVC
PVC
Black
Black
White
54037
54119
54200
Voltage Withstand
Jacket Spark
Peak Power
Volts DC
Volts RMS
kW
500
2000
0.6
PVC = Poly Vinyl Chloride; MTO = Made to Order
8
(800) TMS-COAX • www.timesmicrowave.com