L-S110JGCT Datasheet, PDF (4/14 Pages) PARA LIGHT ELECTRONICS CO., LTD. – SURFACE MOUNT DEVICE LED

SURFACE MOUNT DEVICE LED
Release by
Release by
PARA LIGHT DCC
PARA LIGHT DCC
Part No. : L-S110JGCT
REV:B / 2
z Bin Code List
Luminous Intensity(IV), Unit:mcd@20mA
Bin Code
Min
Max
M
18.0
28.0
N
28.0
45.0
P
45.0
71.0
Q
71.0
112.0
Tolerance of each bin are 15%
Forward Voltage(VF), Unit:V@20mA
Bin Code
Min
Max
4
1.90
2.00
5
2.00
2.10
6
2.10
2.20
7
2.20
2.30
Tolerance of each bin are 0.1Volt
Dominant Wavelength (Hue),Unit: nm@20mA
Bin Code
Min
Max
GA
567.0
570.0
GB
570.0
573.0
GC
573.0
575.0
Tolerance of each bin are 1nm
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength d is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
4. Caution in ESD :
Static Electricity and surge damages the LED. It is recommended use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
DRAWING NO. : DS-73-06-0005
PARA-FOR-068
DATE : 2011-01-24 PAGE 4 of 14