L-C191JFCT Datasheet, PDF (4/14 Pages) PARA LIGHT ELECTRONICS CO., LTD. – SURFACE MOUNT DEVICE LED

Release
Release by
PARA LIGHT DCC
by
PARA LIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : L-C191JFCT
REV:A / 3
z Bin Code List
Luminous Intensity(IV), Unit:mcd@20mA
Bin Code
N
P
Q
R
Min
28.0
45.0
71.0
112.0
Tolerance of each bin are 15%
Max
45.0
71.0
112.0
180.0
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that proximities
the CIE eye-response curve.
2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength d is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
4. Caution in ESD :
Static Electricity and surge damages the LED. It is recommended use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
DRAWING NO. : DS-74-07-0021
PARA-FOR-068
DATE : 2010-03-09 PAGE 4 of 14