UF5GI Datasheet, PDF (1/6 Pages) Pan Jit International Inc. – ULTRAFAST RECOVERY RECTIFIERS

PUF5GI / UF504IG
ULTRAFAST RECOVERY RECTIFIERS
Voltage
400 V
Current
5A
Features
 Silicon epitaxial high-speed diodes
 Soft recovery characteristics
 Low forward voltage, high current capability
 Hermetically sealed.
 Low leakage
 High surge capacity
 Lead free in compliance with EU RoHS 2011/65/EU directive
 Green molding compound as per IEC61249 Std. . (Halogen Free)(SMC)
Mechanical Data
 Case: Molded plastic, SMC, DO-201AD
 Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
 Polarity: Color Band denotes cathode end
 SMC Approx. Weight: 0.0082 ounces, 0.2325 grams
 DO-201AD Approx. Weight: 0.04 ounces, 1.142 grams
 Marking: Part number
1
Cathode
2
Anode
UF504IG DO-201AD
UF5GI SMC
Maximum
Ratings
o
(T_A=25 C
unless
otherwise
noted)
PARAMETER
SYMBOL
LIMIT
UNIT
Maximum repetitive peak reverse voltage
VRRM
400
V
Maximum rms voltage
VRMS
280
V
Maximum dc blocking voltage
VR
400
V
Maximum average forward current
IF(AV)
5
A
Peak forward surge current : 8.3ms single half sine-
wave superimposed on rated load
IFSM
80
A
Maximum forward voltage at 5A
VF
1.25
V
Maximum dc reverse current at rated dc blocking voltage
IR
1
A
Maximum reverse recovery time (Note 4)
TRR
50
ns
Typical thermal resistance
SMC(Note 3)
R_θJA
125
SMC(Note 1)
R_θJC
14
o_C/W
DO-201AD(Note 2)
R_θJL
24
Operating and storage temperature range
TJ, TSTG
-55 to +150
o_C
Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm² copper pad area
2. The testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 10cm x 10cm × 0.5mm copper pad
3. Mounted on a FR4 PCB, single-sided copper, mini pad.
4. Reverse Recovery Test Conditions : IF=0.5A, IR=1A, Recover to 0.25A
March 31,2015-REV.00
Page 1